Current issue: 59(1)
Articles containing the keyword 'tukki'
Category : Article
A model was developed in order to describe the peeling of veneer for determining value relationship for birch veneer logs and stems. The model was based on selling prices of veneer and other products as well as processing costs. The model was utilized for determining the effect of various input variables on the log value.
According to the results, the effect of tree size was important for the value of raw material. Even knottiness had an effect although only in the higher manufacturing costs of knotty veneer were taken into account. Pruning was a method to increase substantially the proportion of knotless veneer.
The PDF includes an abstract in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
A test sawing was made of 807 Scots pine (Pinus sylvestris L.) saw logs of varying size and quality. The most important knot characteristic affecting the value of sawn goods was the diameter of the thickest dry knot. The new minimum requirements for pine logs were proposed on the basis of top diameter of the log and the diameter of the thickest dry and living knot.
The PDF includes a summary in English
-
Kärkkäinen,
E-mail:
mk@mm.unknown
- Halinen, E-mail: mh@mm.unknown
In order to evaluate the strength properties of boards made from small and large Norway spruce (Picea abies) butt logs, 15 small (top end diameter 13 cm) and 15 large (top end diameter 25 cm) logs were sampled from a sawmill in Finland. From each log two test pieces were made in order to measure the bending and compression strength, dry density and average ring width.
The boards from small logs were stronger and their density higher. When the differences between groups were analysed it was found that the strength was determined by the density and ring width. When the density was kept constant, the increase in ring width had a decreasing effect on the strength properties. Because there was a negative correlation between ring width and density, ring width alone had a great effect on the strength properties.
The PDF includes a summary in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
- Hakala, E-mail: hh@mm.unknown
A material of 478 birch logs were measured. The horizontal diameter was on average larger than the vertical one, the difference increasing with the increasing diameter. The reason was supposed to be the effect of sweep and out-of-roundness of logs. The difference between the actual and nominal length increased with the increasing lengths, but decreased with increasing diameter.
The PDF includes a summary in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
Material for this study was collected from 26 stands marked for clear cutting in Southern Finland. The volume of decayed Norway spruce (Picea abies (L.) H. Karst.) timber and pulpwood was determined by deducting the volumes of these assortments (as recorded on the measurement certificate) from the volume of the standing trees. To obtain the economic loss, the volume of decayed wood was multiplied by the difference in stumpage prices between spruce timber of pulpwood and pine pulpwood. In the 17 stands of Buyer A the loss in timber volume caused by decay was 5.84% and the loss in stumpage price 2.84 Fmk/m3 (means weighted by volume). The corresponding figures in the 9 stands of Buyer B were 10.87% and 5.50 Fmk/m3, respectively.
At the mean stumpage price level for the felling season 1977-78 the losses in the stands m.f.c. mentioned above were 2.87% per unit price in the stands of Buyer A and 5.75% in the stands of Buyer B.
The PDF includes a summary in English.
-
Tuimala,
E-mail:
at@mm.unknown
The development of Scots pine (Pinus sylvestris L.) seedlings and damage caused by Hylobius abietis L. (Coleoptera, Curculionidae) were studied during a three-year period. Olfactory responses of H. abietis was studied in laboratory with several volatile oils isolated from different kinds of P. sylvestris seedlings. Resistance of seedlings against H. Abietis was evaluated in terms of their monoterpene composition. Three aspects of resistance (preference, antibiosis and tolerance) were evaluated separately. Seedling chemotype was found to be associated with these aspects of host resistance on only minor scale. Discussion was attached to a further search for host resistance arising from other properties and constituents of oleoresin. Height growth of the seedlings recovering from weevil damage was 86–91% compared to healthy seedlings.
The PDF includes a summary in English.
-
Selander,
E-mail:
js@mm.unknown
- Kalo, E-mail: pk@mm.unknown
At three Finnish match factories 1,629 aspen logs were measured (see Kärkkäinen and Salmi 1978). When the estimation was based on the condition of the butt cross section of a log, less than half of the logs were sound without any discoloration or decay. Based on the condition of the top cross-section, the corresponding figure was a little higher than 50%. The logs with decay were bigger than those without it. There were relatively more butt logs among the logs with decay than among the totally sound logs.
The PDF includes a summary in Finnish.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
The material of this study consists of 1,080 Scots pine (Pinus sylvestris L.) saw logs measures in two saw mills in Northern Finland. The largest and the smallest top-diameter of each log was measured under bark. According to the results, the ovalness was rather small, 1 mm or 4.9% on average. On the other hand, only 14.3% of all logs showed a diameter difference smaller than 2%. The ovalness was larger than 10% in 5.8% of all logs.
The PDF includes a summary in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
In this literature review some error possibilities in the measurement of solid volume of logs and pulpwood are discussed. Although both underestimation and overestimation can occur for various reasons it seems likely that in the stereometric measurement method the real volume is underestimated, at least when Huber’s formula is applied, and the respective middle form factors are too low. Numerous results of empirical investigations are presented in the paper, too.
The PDF includes a summary in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
The aim of the study was to investigate the effect of four packing methods on the field survival and growth of seedlings and transplants of Scots pine (Pinus sylvestris L.) stored over the winter in a cold-storage cellar. The following sorts of plants were used: one-year-old seedlings (1+0) grown in a plastic greenhouse, two-year-old (2+0) open grown seedlings and three-year-old open grown transplants. These plants were stored in open wooden boxes, in sealed plastic bags, in boxes with wet peat on the bottom and in plastic-laminated paper bags.
The control plants were of the same types and were kept in a nursery over the winter. The storage was carried out in a mantle-chilled cold-storage from October 1966 to May 1967. The temperature in the cold-storage was kept around -2 °C and the relative humidity of the air over 90%. The water content of a randomly selected sample plants showed no increase in water deficit after the storing. Part of the seedlings were transplanted in the nursery and the rest were planted in a clear-cut area. A number of the latter plants were treated with an insecticide (1% Intaktol, which contains DDT, Lindane and dieldrin) before planting. All the experiments were examined after one growing season and the planting experiments the next fall.
The transplants (2+1) in the nursery, and in the forest had survived and grown better than the seedlings. In the nursery the 1+0 seedlings survived and grew better than the 2+0 seedlings. There was no difference in mortality between the seedlings. After the first growing season occasional significant differences between the packing methods were observed, but they disappeared during the second growing season. Thus, all packing methods proved to be as successful as the control method without winter storage.
Transplants were more often attacked by the large pine weevil (Hylobius abietis L.) than the smaller seedlings. The damage, however, was considerably greater on the seedlings because of their lower resistance. No significant differences in the Hylobius-attack between the packing methods could be observed. The Intaktol-treated plants were as often attacked as the untreated ones, but the damage was slighter on the treated ones.
The PDF includes a summary in English.
-
Långström,
E-mail:
bl@mm.unknown
The aim of the present study was to establish, by means of planting experiments, the influence of different packing, heeling-in and watering as well as the length of the storage period on the development of Scots pine (Pinus sylvestris L.) seedlings, in all 2,090 seedlings, that had been lifted from the nursery bed in spring. The plants were packed in bundles and into plastic sacks in 1965 (6 storage methods) and in 1966 (3 storage methods). Control seedlings were planted without storing at the time when storage of the test material begun. The plantations were followed 3–4 years.
Storage for two weeks in the different ways and planting without storage gave similar results when seedling survival was compared. Storage in plastic sack proved to be as good as storage in bundles in a cellar, and healing-in in moist soil or in a drain were both usable methods. Watering the seedlings did not improve the results, which indicates that the storage caused no serious lack of water.
After four growing seasons an average of 19,6% of the seedlings of the 1965 experiment died, the bulk of them by the end of the first growing season. Despite control treatment, Hylobious abietis caused serious damages. In the plantations of the year 1966 mortality of the seedlings was under 5% by the end of third growing season. During the first two growing seasons after planting differences in growth of the seedlings stored in different ways could be observed in the plantations of the year 1965, but the differences levelled out later. In the plantations established in 1966 no differences in growth occurred.
The PDF includes a summary in English.
-
Räsänen,
E-mail:
pr@mm.unknown
- Koukkula, E-mail: ak@mm.unknown
- Yli-Vakkuri, E-mail: py@mm.unknown
The aim of the present study was to find the factors influencing the distribution of Norway spruce (Picea abies (L.) H. Karst.) logs on various grades with special stress on the effects of the grade on the value of logs. The material was obtained from ten sawmills located in Southern Finland by grading a total of 13,559 logs.
The results showed that knottiness in its different forms of appearance is the most important factor influencing the quality of spruce logs. Its significance is clearly greater in spruce than in Scots pine saw logs. Among the other defects, the most common are crooks. Even scars and decay occur to a considerable degree, but other defects seldom affect the grade. The quality of butt logs is markedly better than that of top logs. Both in butt and top logs the smallest logs in diameter are of poorer quality. However, in the largest diameter classes the quality begins again to decrease.
The difference in the quality of logs of the same grade at various sawmills is very small. The results of grading at varying times at the same sawmill show greater differences than can be observed between different sawmills. However, the logs of sawmills that procure the timber from coastal areas and islands are inferior to those which procure the timber from the mainland.
The PDF includes a summary in English.
-
Heiskanen,
E-mail:
vh@mm.unknown
The aim of the study was to find out more about pine weevil (Hylobious abietis L.) injuries in Scots pine (Pinus sylvestris L.) seedling stands and their control by means of DDT. For this purpose, inventories were made of seedling stands established earlier. Control experiments were made on burnt areas by planting seedlings dipped in a DDT emulsion.
The results of the inventories show that injuries caused by pine weevils can, in certain circumstances, especially in seedling stands established by planting, cause the complete failure in artificial regeneration. The extent and quality of the injuries vary greatly according to planting method, treatment of the cutting area, age of the seedling stand, environmental factors, and weather conditions. The most extensive injuries occur in regeneration areas of old Norway spruce stands burnt after clear cutting and planted with Scots pine seedlings. Injuries are greater in seedling stands established by planting, especially after broadcast burning, than in seedling stands originating either from artificial or natural seeding. The quality of the patch for sowing or planting has a considerable effect on the quantity and character of the injuries: in a patch from which organic matter has been removed, injuries do not appear or they are slighter. Seedlings can be protected effectively and economically by dipping their tops up to the root collar, in a DDT emulsion before planting.
The PDF includes a summary in English.
-
Nenonen,
E-mail:
mn@mm.unknown
- Jukola, E-mail: jj@mm.unknown
Wood demand and practices in the marking of trees for cutting have affected the silvicultural state of the forests of Finland in the early 1900s. The aim of the study was to study the development of timber sales and the marking of trees for logging, with a special emphasis on variation in the volume of the sales and assortment range. The study is based on statistics of the District Forestry Boards and Forest Management Associations about timber marked for cutting in 1931-1953.
The professionals in the District Forestry Boards and Forest Management Associations have marked annually in average 9 million stems of heavy timber and about 7 million m3 of stacked wood for sales. The volume follows business cycles, the changes in the volume of stacked wood being larger than of heavy timber. When demand was high, the number of professional workers limited the supply of wood. There were large differences in the volumes marked within the country. The share of small diameter stacked wood has increased since 1930s compared to heavy timber.
The article includes a summary in German.
-
Yli-Vakkuri,
E-mail:
py@mm.unknown
The wages of logging and haulage has been dependent on the decisions of foremen. The aim of this study was to provide better insight on how working conditions in a logging site affect productivity of the work. Six working sites operated by Forest Service, Veitsiluoto Oy and Kemi Oy in the communes of Salla, Muonio and Kolari in Lapland were studied. The forests in the area were mostly Scots pine (Pinus sylvestris L.).
The effect of average volume of the stems, the average daily haulage over distances of various lengths, density of the stand and shape of the stem on effectivity was calculated. The size of the team was of considerable importance to the felling and haulage result in the Northern Finland where the feller assists in loading of the logs. One of the aims of the study was to find out what size of team is most advantageous for each haulage distance. The results show the optimum distance of haulage for teams of different sizes.
The article includes a summary in English.
-
Maliniemi,
E-mail:
em@mm.unknown
Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.
This presentation discusses accuracy of the quality grading of Scots pine (Pinus sylvestris L.) saw logs suggested by professor Ilmari Vuoristo based on a data collected by Valtiala. According to the study, greatest inaccuracies in the grading by visual inspection was caused by differences between the evaluators.
-
Heiskanen,
E-mail:
vh@mm.unknown
Silva Fennica issue 52 includes presentations held in professional development courses, arranged for foresters working in public administration in 1938. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.
This presentation describes the conditions according to which the state can reclaim valuable timber-trees on forest land which ownership is transferred to landless population in settlement work.
-
Jokinen,
E-mail:
pj@mm.unknown
The issue 39 of Silva Fennica includes presentations held in professional development courses in 1935 that were arranged for foresters working in public administration. The presentations focus on practical issues in forest management and administration, especially in regional level.
This presentation describes the quality of timber and coniferous forests in the point of view of saw industry.
-
Vuoristo,
E-mail:
iv@mm.unknown
Category : Article
The objective of the present investigation was to clarify the profitability of pruning silver birch (Betula verrucosa, now Betula pendula Roth) in the growing of raw material for veneer industry. Calculations were made on the grade, value, and price of pruned and untreated butt logs as well as on costs of pruning and the development of pruned trees.
The grade distribution of unpruned veneer butt logs, the grade distribution of the veneer yield, and consequently, the value of veneer yield and log prices at the plant are considerably better than those of average logs. The grade, value and price increased with increasing diameter. The value and price of pruned butt logs depended primarily on the difference between the turning pruning diameters, and their increase with decreasing pruning diameter and increasing turning diameter. The value of pruned butt logs is always considerably higher than that of unpruned logs. The increase in the value correlates to the pruning and turning diameters, and is, for example, in rotary-cut logs which have been pruned when 10 cm in diameter 80–130%.
Pruning increases the stumpage in naturally regenerated silver birch stands on Oxalis-Myrtillus site by 2,000–3,000 Fmk/ha when employed at 20 years of stand age and rotary cutting at 60–80 years of age respectively. The average pruning costs on Oxalis-Myrtillus site are 51–57 Fmk/ha.
The PDF includes a summary English.
-
Heiskanen,
E-mail:
vh@mm.unknown
The objective of the study was to establish the influence of the founding density of a stand and the intensity of intermediate cutting on the quality of pine saw logs stems, primarily on their branchiness. Measurements were carried out in 68 Myrtillus-type and 32 Vaccinium-type Scots pine (Pinus sylvestris L.) stands. The quality of 1,982 sample trees was assessed.
According to the results, the branchless part of the stem is longest in the older age classes of trees. In all age classes the percentage of the branchless part is highest in medium sized stems. The relative height of the crown limit is greatest in small diameter classes and continues as the thickness of the tree increases. The crown is longer in the thicker tree. The grade of the butt log is on average highest in medium sized stems. Knottiness of a log made it unsuitable for a saw log only among the thickest stems. The relative share of the u/s grade decreased as the thickness of the trees increased.
From the point of view of early development of the trees it was concluded that in all age classes the branchless part is the shorter the faster the tree has grown in diameter when it was young. Also, branches of the butt log are the bigger the faster the tree has developed when it was young. The grade of the butt log improves as the thickness of the annual rings diminishes.
To produce good quality sawn timber, the pine stands should be established dense, and the first thinnings should be delayed as much as possible. The best time for the thinning would be when the diameter of the dominant trees at stump height is 12–15 cm and when all the branches have died on the length of the butt log. After the first thinning, comparatively intense intermediate thinning may be applied.
The PDF includes a summary in English.
-
Heiskanen,
E-mail:
vh@mm.unknown
Due to shortage of large logs, sawmill industry has been forced to buy also smaller logs, which also pulp industry uses as a raw material. Sawmills must be careful in the pricing of the logs, because profitability of sawing of timber depends on the size of the logs. These industries use different measures when they buy timber: pulp industry uses piled measure in meters, while saw logs are measured individually in cubic feet. The aim of the study was to develop sets of figures on technical cubic measure of a saw log and its relation to a piled cubic meter from the same log used as pulp wood. In addition, the effect of form class on the measures was studied.
The relation was assessed for trunks that had good, mediocre or unfavourable form class, which distinction is easy to make for a forest worker buying timber. The relations can be used by a buyer of saw logs or pulpwood who need to compare the prices or when the seller of the wood compares the offers.
The PDF includes a summary in German.
-
Wuoti,
E-mail:
ew@mm.unknown
The aim of the study was to explain the regression between the cubic content of the trunk of a tree and of logs cut from the trunk. The minimum size of trunk that can be used to saw logs has been 18 feet long and 5″ of top diameter in Finland (in 1930s). The average length of logs is 16‒18 feet. The data of this study was collected in seven areas around Finland. The results show that there is regression between the volume of the trunk, the volume and the logs cut from the trunk and the number of logs. Consequently, it is possible to determine the average regression between the trunk and log sizes for forest technical purposes. The regression varies in different parts of the country due to varying growth condition of the trees and different age classes. It is probable that the figures have to be re-examined in the future.
The PDF includes a summary in English.
-
Vuoristo,
E-mail:
iv@mm.unknown
Pruning growing trees influences tree growth and value of the wood and yield of timber of the stand. Pruning living branches create open wounds on the stems that can risk the growth of tree species that are vulnerable to injuries. For instance, pruning has been shown to cause decay in Norway spruce (Picea abies (L.) H. Karst.), while Scots pine (Pinus sylvestris L.) can quickly heal over the branch scars. Pruning of living branches reduces the crown, the effect of which remains small if only the lowest branches are pruned. Pruning of dry branches has little effect on the health of the tree. The main objective of pruning is to improve the quality of timber. Knottiness decreases strength and appearance of timber. Pruning increases the yield of knot-free sapwood, which is especially valuable in veneer timber. Pruning is, therefore, at present most suitable for birch and aspen which are used in veneer industry. In both species pruning should be directed mainly to dry branches.
The PDF includes a summary in German.
-
Lappi-Seppälä,
E-mail:
ml@mm.unknown
The export of roundwood from Finland was studied based on the official statistics of foreign trade. The volumes were converted to solid volumes under bark. Roundwood (logs and masts) or raw timber trade consisted mainly of saw logs. The main tree species was Scots pine (Pinus sylvestrs L.) and Norway spruce (Picea abies (L.) H. Karst.). The annual volumes varied from 29,200 m3 in the war year 1918 to 657,200 m3 in 1924. Before the World War I the roundwood was exported mainly to Sweden and Russia, after the war the trade to Russia ceased. Also split spillet was a significant export item before the war. The export peaked in 1916 to 3 million m3, but decreased after the war to 30,000‒40,000 m3. The most important export item in the group of hewn timber has been Egyptian rafters, with annual export of 15,000‒284,600 m3 with the exception of the time of war. The export of spars exported to other countries than Egypt was highest before the war with 125,000 m3. The export of sleepers varied strongly, peaking in 1922. The total export of roundwood varied from 131,000 m3 in 1918 to 4.3 million m3 in 1927. Roundwood has mainly been exported to the European countries. Before the war, the main trading partners were United Kingdom and Russia. After the war the share of United Kingdom was nearly half of the volume, and Russia was replaced with Sweden.
The PDF includes a summary in German.
-
Pöntynen,
E-mail:
vp@mm.unknown
The survey focuses on the stumpage prices of standing sales, where the buyer of the wood takes care of felling and transport of the timber. The study concentrates further on conifer sawn timber. The prices of the sawn timber rose continuously from 1891 to 1910. After 1913 the stumpage price fluctuations reflected the changes in the market. The article includes a detailed description on the changes of the saw timber in 1913-1922 and the factors affecting the prices. The prices are shown for different parts of the Finland. The first world war affects the prices and demand on saw timber in 1917-1918. In Northern Finland the prices of sawn timber increased slower than in Southern Finland. In general, the unfavorable factors have had stronger impact on the stumpage prices than the favorable.
The PDF includes a summary in German.
-
Saari,
E-mail:
es@mm.unknown
The influence of log properties (diameter, length, taper, volume, density and quality), sawing pattern, yield, sawing efficacy, stoppages, consumption of electric power and thereby on the financial result of sawing was examined. In addition, the significance of various revenues and costs were studied from the point of view of the financial result of sawing. The revenues from sawing are composed of revenues obtained from sawn goods, chips, sawdust and bark. The costs in sawing are made of raw material, capital, labour, energy and other costs. The results were calculated per diameter class and applying the basic principle of targeting all returns and costs on the different diameter classes.
The results are based on test sawings of a total of 1,606 Scots pine logs representing eight diameter classes, using conventional frame saw sawing patterns. In addition, a sawing simulator was used. Log top diameter had a significant influence on the financial result obtained when calculations were made per log volume. The financial result obtained for the biggest diameter class exceeded that of the smallest diameter class by FIM 99.1/m3. Sawing revenues accounted for FIM 66.0/m3 and sawing costs for FIM 33.1/m3 of this difference. In addition to being influenced by the top diameter, the yield and sawing efficacy were observed to have a clear influence on the financial result. The influence of stoppages was smaller.
The only means of gaining significant improvement in the annual result obtained from sawing were improvements in the revenues from sawn goods or reductions in the cost of raw material. Increase of the minimum diameter led to a significant improvement in the annual result obtainable from sawing only if the production time remained unchanged; i.e., when correspondingly more logs from the other diameter classes were sawn. If the production time was reduced by an amount corresponding to the increase in minimum diameter, then the annual result fell dramatically except in the case of minimum diameter.
The PDF includes a summary in English.
-
Hakala,
E-mail:
hh@mm.unknown
This study is concerned with silvicultural selection from above. The material consists of 18 Scots pine (Pinus sylvestris L.) sample plots in the southern half of Finland in experimental forests. The method is motivated by the great difference between the stumpage prices of saw timber and pulpwood. The method suggested includes the removal of individuals belonging to the predominating canopy, to achieve high levels of income from the stand at an early stage. The method is applied at when the growing stock is attaining saw-timber size. Before that the stand is treated with thinnings from below. It is supposed that the volume of growing stock is maintained at a level as high as that in below-thinned stands, and that rotation is of normal length.
On the average, the increment in basal area, as well as volume increment, is greater in stands selectively cut from above than in those treated with low thinnings of the same degree. Initially, selection from above seems to exert a negative effect upon the development of dominant height; later, the dominant height reassumes the same rate of increment as in the below-thinned stands. Selection from above also means an increase in saw-timber production, although it involves a reduction in the mean size of saw timber. The investigation includes growth and yield tables for pine stands treated with silvicultural selection from above.
The results of the investigation prove that silvicultural selection from above is at least as profitable as low thinning. This provides freedom for stand treatment, and contributes to the application of a method most suitable for the owner in each individual case. It is further stressed that the maintenance of a high wood capital in the stand is far more important than the method of thinning applied.
The PDF includes a summary in English.
-
Vuokila,
E-mail:
yv@mm.unknown
