Articles containing the keyword 'timber'

A process-oriented tree and stand growth model is extended to be applicable to the analysis of timber quality, and how it is influenced by silvicultural treatments. The tree-level model is based on the carbon balance and it incorporates the dynamics of five biomass variables as well as tree height, crown base, and breast height diameter. Allocation of carbon is based on the conservation of structural relationships, in particular, the pipe model. The pipe-model relationships are extended to the whorl level, but in order to avoid a 3-dimensional model of entire crown structure, the branch module is largely stochastic and aggregated. In model construction, a top-down hierarchy is used where at each step down, the upper level sets constraints for the lower level. Some advantages of this approach are model consistency and efficiency of calculations, but probably at the cost of reduced flexibility. The detailed structure related with the branching module is preliminary and will be improved when more data becomes available. Model parameters are identified for Scots pine (Pinus sylvestris L.) in Southern Finland, and example simulations are carried out to compare the development of quality characteristics in different stocking densities.

• Mäkelä, E-mail: am@mm.unknown
• Ikonen, E-mail: vi@mm.unknown
• Vanninen, E-mail: pv@mm.unknown

The existence and direction of causal relationships between the time series for the Finnish roundwood market for the period 1960–1994 is tested. Using simple bivariate analysis, we found evidence that for both logs and pulpwood, the lagged prices are helpful in forecasting quantity for the next year, but not vice versa. Saw log stumpage prices have significantly Granger-caused pulpwood prices over the business cycles, but the effect has diminished towards the present time. For quantities traded, the direction of causality was rather from pulpwood to saw logs. The consistency of bivariate test results was checked by the Granger-causality tests within trivariate VAR-models for both markets, and the results were found to be fairly similar to bivariate tests. The price fluctuations in the international markets for forest products have been found to be carried to domestic wood markets dominantly via the pulpwood part of the market.

• Toppinen, E-mail: at@mm.unknown

Three most promising protection methods of pine pulp wood stacks against the attacks of Tomicus piniperda L. were compared. The methods were the covering of stacks by fibreglass-strengthened paper or twofold achrylene netting, removing the upper parts of stacks, and enhanced planning of the placement of the timber store using ARC/INFO GIS-software. T. piniperda was observed to strongly prefer the upper parts of the stacks: 90 % of the beetles occurred within 0.5 meters of the top of the stacks. Covering of the stacks decreased the attack density of T. piniperda, and the protection effect of covering was 80 %. Due to long transport distances and fragmentation of forest landscape the relocation of timber store was found to be an unsuitable method in the practical level. Also, taking into account the costs of the method, removing of the upper parts of stacks was considered to be the optimal solution.

• Jääskelä, E-mail: mj@mm.unknown
• Heliövaara, E-mail: kh@mm.unknown
• Peltonen, E-mail: mp@mm.unknown
• Saarenmaa, E-mail: hs@mm.unknown

In this study, logistic regression and neural networks were used to predict non-industrial private forests (NIPF) landowners’ choice of forest taxation basis. The main frame of reference of the study was the Finnish capital taxation reform of 1993. As a consequence of the reform, landowners were required to choose whether to be taxed according to site-productivity or realized-income during the coming transition period of thirteen years.

The most important factor affecting the landowners’ choice of taxation basis was the harvest rate during the transition period, i.e. the chosen timber management strategy. Furthermore, the estimated personal marginal tax rate and the intention to cut timber during next three years affected the choice. The descriptive landowner variables did not have any marked effect on the choice of forest taxation basis.

On average, logistic regression predicted 71% of the choices correctly; the corresponding figure for neural networks was 63%. In both methods, the choice of site-productivity taxation was predicted more accurately than the choice of realized-income taxation. An increase in the number of model variable did not significantly improve the results of neural networks and logistic regression.

• Pesonen, E-mail: mp@mm.unknown
• Kettunen, E-mail: ak@mm.unknown
• Räsänen, E-mail: pr@mm.unknown

The first aim of this study was to develop a simulation model describing the flow of different timber qualities to different firms. The second aim was to study preliminary the factors which affect timber distributions. In addition, we tested the hypothesis that in a small sawmill firm the traditional way of organizing timber procurement does not direct effectively good quality logs to the special production. The game theoretic approaching and the principles of Monte-Carlo simulation were applied in development of the simulation model. The most important factors of the model were tried to find for further studies with sensitive analysis. Empirical validation brought forth promising results in the area of one municipality. The buyer’s awareness of a marked stand, the seller’s willingness to sell a marked stand, the buyer’s ability to pay for wood and the proportion of first quality pine logs in a marked stand affected the distribution of pine logs. The results also supported the hypothesis that the traditional system, in which sawmills or their own forest departments procure themselves all timber needed, is not the most effective way to direct enough good quality timber to the special production.

• Tolvanen-Sikanen, E-mail: tt@mm.unknown
• Harstela, E-mail: ph@mm.unknown
• Sikanen, E-mail: ls@mm.unknown

The amount of carbon (C) stored in wood products manufactured in Finland was calculated with the help of a model using wood harvesting statistics, product flows and lifespans in order to study how much C could be set aside from the atmospheric C cycle outside the forest ecosystem. The calculations showed that on the average 9.9 Tg C/a was in harvested timber in 1986–1991 in Finland. C emissions of timber harvest and transport were 0.1 Tg C/a. In production processes about one third of the C bound in in timber was released into the atmosphere, but two thirds was still bound in products. After 50 and 100 years, more than 40% and 33% of the C initially in products was either in products still in use or disposed to landfills. The wood product C storage was most sensitive to landfill decay rate and to the burning of abandoned products for energy, but not to the same extent to the length of the lifespan of products.

• Karjalainen, E-mail: tk@mm.unknown
• Kellomäki, E-mail: sk@mm.unknown
• Pussinen, E-mail: ap@mm.unknown

The paper discussed the definitions of different Finnish and English terms concerning timber harvesting, and suggests definitions and translations of the terms.

• Kantola, E-mail: mk@mm.unknown
• Harstela, E-mail: ph@mm.unknown

The model predicts the base diameter of the thickest living branch of a tree growing in a planted or naturally regenerated even-aged stand. A mixed model type was used in which the residual variation was divided into within-stand and between-stand components. The study material consisted of 779 trees measured in 12 plots located in 20 to 35 years old Scots pine (Pinus sylvestris L.) stands (breast height age 10 to 20 years). Branch diameter was closely connected to the breast height diameter of the stem. In a stand of a certain age, competition by close neighbours slightly decreased branch diameter in a given diameter class. According to the model, the greatest difference is between trees subjected to very little competition and those subjected to normal competition. The model was used in simulated stands with varying age, density, and tree arrangement. The simulations showed that trees with rapid diameter growth at young age had thicker branches at a given breast height diameter than trees with slower diameter growth. However, a very slow growth rate did not produce trees with branches thinner than those possessing a medium growth rate.
The PDF includes an abstract in Finnish.

• Pukkala, E-mail: tp@mm.unknown
• Karsikko, E-mail: jk@mm.unknown
• Kolström, E-mail: tk@mm.unknown

The main stem of young Scots pine (Pinus sylvestris L.) trees was cut off halfway along the current leading shoot and the two previous years’ leading shoots to simulate moose (Alces alces) damage. Trees of the same size were chosen as controls before treatments. The experiment was inspected ten years after artificial stem breakage. Removing the current leading shoot and the second shoot did not essentially affect the height and diameter growth of the trees. Removal down to the third shoot reduced the height as well as diameter growth. The average loss in growth was equivalent to less than one year’s growth. When the stem was cut off at the second or third shoot, stem crookedness and the presence of knots resulted in stem defects that will subsequently reduce the sawtimber quality. A high proportion of the stem defects will obviously still be visible at the first thinning cutting. Removing injured trees as pulpwood and pruning the remaining parts of cut stems evidently improves the quality of pine stand with moose damage.

The PDF includes an abstract in Finnish.

• Heikkilä, E-mail: rh@mm.unknown
• Löyttyniemi, E-mail: kl@mm.unknown

Shoot losses due to maturation feeding by pine shoot beetles (Tomicus piniperda (L.) and T. minor (Hart.), Col., Scolytidae) and subsequent growth losses were studied in Scots pine (Pinus sylvestris L.) stands growing at different distances from a timber yard, where pine timber was stored during the years 1982–84. In autumn 1985, pine trees were felled at 20, 40, 80, 500 and 1,500 m distance from the timber yard, five trees in each distance class. Trees were analysed for beetle attack, needle biomass and growth. In autumn 1988, increment cores were taken from 20 trees in each distance class.

In 1985, different damage estimates showed that beetle damage was more than 10-fold in the crowns of pine trees growing close to the timber yard as compared to less damaged trees in greater distance. Crude needle biomass estimates indicated that the trees attacked most had lost more than half of the total foliage. Following three years of attack, basal area growth decreased for 2–3 years and recovered during the subsequent 3 years, the total period of loss thus being 5–6 years. The loss in volume growth during 1983–85 was ca. 70, 40, 20 and 10% at 20, 40, 80 and 500 m distance from the beetle source, respectively, compared to the stand at 1,500. Growth losses did not occur until the number of beetle-attacks, ”pegs”, exceeded ca. 200 per tree. The highest observed growth losses occurred in trees with more than 1,000 pegs per tree.

The PDF includes an abstract in Finnish

• Långström, E-mail: bl@mm.unknown
• Hellqvist, E-mail: ch@mm.unknown

Coniferous timber imported by rail from the Soviet Union in Finland was studied for the presence of potential forest and timber pest beetles. Systematic samples of fourteen lots of pine pulpwood were examined. Seven of the lots originated from the European parts of the Soviet Union and seven from Siberia. 23 species of Scolytidae and about 18 other phloeophagous species were found including three species new for Finland: Phaenops guttulata (Buprestidae), Ips subelongatus and Orthotomicus erosus (Scolytidae).

The PDF includes an abstract in Finnish.

• Siitonen, E-mail: js@mm.unknown

The paper presents a simple model of long-term forest management planning in tree plantations. The model is particularly suitable for developing countries where the research resources are limited. The management plan is prepared in two steps. First, one or several treatment schedules are simulated for each calculation unit (age class, compartment, etc.) over the selected planning period. Second, an optimal combination treatment schedules according to the selected objectives and constraints is searched by mathematical programming. The simulation of growth is based on the prediction of the diameter distribution at the desired time point. All stand characteristics are derived from this distribution. The models needed in the yield simulation can be estimated from temporary sample plots. A case study management plan for 13,000 ha of Pinus kesiya (Royle ex Gordon) plantations in Zambia is presented to demonstrate the system.

The PDF includes an abstract in Finnish.

• Pukkala, E-mail: tp@mm.unknown
• Mubita, E-mail: om@mm.unknown
• Saramäki, E-mail: js@mm.unknown

Effects of varying rotation, thinning, fertilization and harvest intensity on the productivity and nitrogen cycle of Scots pine (Pinus sylvestris L.) stand were studied on the basis of computer simulation. The increasing intensity of management increased the loss of nitrogen in the cycle. Short rotation, associated with early thinning by means of the whole tree harvest, proved to be especially detrimental regarding the productivity of the forest ecosystem. Fertilization associated with thinnings is of great importance in maintaining the productivity of a forest ecosystem during an intensive timber harvest.

The PDF includes an abstract in Finnish.

• Kellomäki, E-mail: sk@mm.unknown
• Seppälä, E-mail: ms@mm.unknown

Four teams of two workers were time-studied in clearcutting of a cypress plantation and three teams in sulky skidding. The heart rate was recorded every 30 s. The average heartrate in timber cutting was 117.5 ± 13.4 P/min, and it was mainly dependent on worker’s working capacity. Average work load index was 41 ± 3% when working at 97% performance. The production rate was then 2.5 m³/h (crew). In sulky skidding the heart rate was lower, 106 ± 1.1 P/min, as well as the work load (WLI 30 ± 1%) and performance rating (87%). The low production rate (1.1 m³/h) (crew)) over 45 m distance is mainly due to under-dimensioned load size. The energy expenditure in timber cutting was 21.4 kJ/min and in sulky skidding 16.3 kJ/min. Daily energy expenditure was 15.0 MJ/d, and most of the timber cutters belonged to the class ”exceptionally active”.

The PDF includes an abstract in Finnish.

• Saarilahti, E-mail: ms@mm.unknown
• Bakena, E-mail: eb@mm.unknown
• Mboya, E-mail: gm@mm.unknown
• Minja, E-mail: tm@mm.unknown
• Ngerageze, E-mail: tn@mm.unknown
• Ntahompagaze, E-mail: jn@mm.unknown

In 1979, the Federal Research in the United States instituted a so-called ”tight money” policy which led to a decrease in the demand for stumpage. The decrease in demand brought about lower stumpage prices and, consequently, a waning interest in policies to stimulate NIPF production. The authors report on five recent studies on NIPF behaviour and raise concerns that increases in demand for housing may bring new pressure upon NIPF as a source of wood.

• Steiguer, E-mail: js@mm.unknown
• Royer, E-mail: jr@mm.unknown

In order to understand the present forest policies for the small woodlot of Quebec, it is essential to understand the history of settlement of Quebec. Following this brief description, the author introduces the various forest policies (programs) which have been initiated in Quebec by various levels of governments in order to deal with the management of these lands.

• Gendreau, E-mail: cg@mm.unknown

In Japan many governmental projects have been promoted during 35 years since 1950, which were most active in the history of our forestry and wood industry. They were pushed forward for and by high economic growth. This article refers to the development of our forest policy and projects in those days. But as for the future of the forest economics, it is an urgent question to develop the comparative study between every nation’s experience. In order to contribute to this problem, the forest policy is divided into three fields and experiences are discussed.

• Handa, E-mail: rh@mm.unknown

Standard methods of welfare economics are used in a market simulating framework to evaluate policy measures designed to increase future timber supplies. Forest management cost-share programs are examined using this methodology. The differential regional impact of cost-share payments is considered, as is the distribution of these benefits between stumpage producers (owners of forest land) and stumpage consumers (producers of forest products). Previous estimates of the welfare gains that would result from a higher level of forest management cost-share payments in the southern United States are revised to account for the loss of public revenue resulting from lower future prices. A methodology for comparing alternative policy instruments is discussed, and a preliminary, qualitative comparison is made between the use of cost-share payments and alternative policy measures.

• Brooks, E-mail: db@mm.unknown

An empirical analysis of the Finnish non-industrial private forest owners indicates that forestry extension has an effect on the supply of timber and the use of cutting potentials. This effect appears to be indirect rather than direct. The use of extension services is likely to increase the frequency of timber sales, which in turn, increases the use of the allowable cut via increased volume of actual cuttings. Forestry extension can also be considered as an intermediate variable through which certain background conditions and owner characteristics affect the use of cutting potential.

• Järveläinen, E-mail: vj@mm.unknown

Development of timber sale accounting system for the U.S. Department of Agriculture, Forest Service ordered by the U.S. Congress, has entailed numerous evaluations and research projects. Critics of the current process claims administrative costs are not recovered by the prices paid for Federal timber. However, management of multiple resources for multiple uses makes traditional accounting difficult; i.e., keeping track of cash flows. A further complication involves allocating costs to the various resources (joint cost allocation), for which no nonarbitrary method currently exists. A concurrent issue involves the building of roads for timber harvest into areas released from wilderness consideration. Environmentalists see the road building program of the Federal land management agencies as an additional reason Federal management costs are not recovered from timber-generated revenues. The heart of the issue is which lands are economically suited for timber management, and what nonmarket benefits and costs accrue from the timber management.

• Risbrudt, E-mail: cr@mm.unknown

A computer model was developed for predicting knottiness of wood material of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) and birch (Betula sp). The prediction included location of knots, their size and quality, i.e. if they are dead or living knots. The model suits best for tree species where branches are born at the base of shoots, in Finland such tree species is Scots pine.

The usefulness of the model was tested in the prediction of knots in wooden elements of joinery industry. According to the results, the shape of cross section affects the surface quality of elements. Especially useful is a quadratic cross section as it increases the probability to get a knotless surface.

The PDF includes an abstract in English.

• Kärkkäinen, E-mail: mk@mm.unknown

The Forest 2000 Programme is a long-term programme for forestry and the forest industries in Finland. It attempts to obtain a better integration of timber production and other forms of forest use. The total annual cut is to be increased by 15 million m³ by the year 2010. This is almost one third greater than the level during the first few years of the 1980’s. In order to achieve the cutting targets, the cut area will have to be increased by almost one third by the turn of the century. The area of thinnings will experience the greatest increase. Considerable changes are proposed in silvicultural and basic improvement work. According to the programme, the growth of the raw-material base and the consumption of the wood-based products will permit an annual increase of about 3% in the production of the forest industries as a whole until the end of the century. This would be the same as the target growth rate of the GNP.

The PDF includes an abstract in Finnish.

• The Forest 2000 Programme sub-commitee, E-mail: –

Totally 653 battens and planks sawn from butt logsof Scots pine (Pinus sylvestris L.) were chosen from 3 saw mills. The sawn goods were sorted according to normal sorting principles. In order to determine growth rate in the youth, the mean value of the average ring width was measured at the butt end at various distances from the pith.

The average ring width increased as the quality of the sawn goods decreased. The difference between the quality classes in ring width was measured between 2 and 4 cm from the pith. As the size of sawn goods, and, simultaneously, the log size increased, the average ring width increased in a given quality class. Research reinforced previous results, in which slow diameter growth of young Scots pines has been shown to reflect the good quality of sawn goods.

The PDF includes a summary in English.

• Halinen, E-mail: mh@mm.unknown

A methodology to evaluate forestry programs aimed at increasing timber supply from nonindustrial private forests is presented that aggregates the marginal social cost and marginal social benefit of a sample program participants and compares them in a benefit-cost efficiency ratio. The paper exposes a methodology followed to evaluate several forestry programs in Massachusetts, USA, and discusses its advantages and inconveniences compared to the other methodologies that have been used for the same purpose. The marginal analysis is based on detailed property and landowner behaviour surveys which are costly but represent a good standard to compare the performance of other approaches. 

The PDF includes a summary in Finnish.

• Harou, E-mail: ph@mm.unknown

The paper discusses the evaluation of timber production policies with different income (timber drain) schedules. Special attention is given to the temporal smoothness of the income flow. A utility model is formulated in which the objective is to maximize a fixed consumption pattern, and money can be saved and borrowed at different interest rates. We thus have smoothness requirements only for consumption, the capital market then determines the smoothness of the optimal income flow. Present discounted value and maximization of even income flow criteria are special cases of the utility model. Consumption can be maximized by linear programming. A sample problem is presented.

The PDF includes a summary in Finnish.

• Lappi, E-mail: jl@mm.unknown
• Siitonen, E-mail: ms@mm.unknown

Flight periods of insects breeding on birch (Betula sp.) timber were observed by means of window flight traps baited with freshly cut birch logs in five locations in Finland from 1972 to 1976. Only few species were caught during the study. In general, these species were on the wing during midsummer, although flight periods of some of them were relatively long. Scolytus ratzeburgi Jans. caused harmful staining of wood within a month from attack, but the damage by the wood-boring pests remained negligible throughout the first storage summer.

The PDF includes a summary in Finnish.

• Löyttyniemi, E-mail: kl@mm.unknown

Using literature and a simulator experiment, an ordinary processor and a grapple loader processor were compared in conditions corresponding to thinning later than the first commercial thinning. Visual bucking only was employed in the simulator experiment. The strip road spacing was 30 m and there was no preliminary skidding of the trees. The simulator experiment confirmed the view reached in the literature that work productivity of the grappler loader processor is 20–40 % greater than that of an ordinary processor provided that the stem size is under 0.2–0.4 m3.

The PDF includes a summary in English.

• Harstela, E-mail: ph@mm.unknown
• Maukkonen, E-mail: am@mm.unknown

The resistance of Finnish softwood timbers to Macrotermitinae termites was tentatively tested under tropical conditions in Zambia using a field microtest method. Picea abies (L.) H. Karst. and Larix sibirica L. sapwood and heartwood, as well as Pinus sylvestris L. sapwood, and the sapwood of the locally grown Pinus kesiya, exhibited no natural termite resistance. On the other hand, Juniperus communis heartwood appeared to be virtually immune and the heartwood of P. Sylvestris had some resistance. There were also some differences in the resistance of the heartwood of the different P. Sylvestris individuals tested, which was correlated with the width of the annual rings in the wood samples. The termite species involved were Microtermes sp. and Odontotermes sp. The possibilities of using different types of Finnish softwood timber in the regions in the tropics where there is a risk of termite damage is discussed.

The PDF includes a summary in Finnish.

• Löyttyniemi, E-mail: kl@mm.unknown

Certain trends in the sales behaviour of private non-industrial forest owners suggest that the forest industries have to rely on a raw material supply much less than the allowable cut. This paper deals with several factors responsible for the change in sales behaviour during the last 20–25 years. These changes are caused by social change, a multi-face process which is led by industrialization. It is manifested in the increasing division of labour, more pronounced strive for efficiency, change in social values for the benefit of the adoption of innovations and thus of further changes.

It has become more common than previously to borrow money instead of selling timber. An incentive for doing so is provided by the increased progression of income tax scales which makes it more profitable than earlier to substitute a loan for timber sales with a view to reduce the amount of taxes. In 1977, the real value of the farmers’ debts was 1.7 times as large as in 1970. Inflation provides a further incentive to borrow money rather than to sell timber, because it tends to reduce debts, whereas a growing stock keeps increasing without affecting the property taxation, maintaining its real unit value.

Certain forestry policy measures conductive to increasing the forest owner’s willingness to sell timber are suggested. Among the most promising seems to be an adjustment of the present area-based yield taxation so as to take into account the age class distribution of the growing stock.

The PDF includes a summary in Finnish.

• Riihinen, E-mail: pr@mm.unknown

Planners of the Soviet pulp and paper industry are constantly faced with the problem: which investment policy guarantees the best location structure? Should one invest in existing localities or expand to new areas, especially in heavily forested parts of Siberia? A location theory for the pulp and paper industry, based on three factors (markets, wood raw materials, relative costs) has been suggested by the Soviet authors Antonov and Trusova. In the present study the theory is – for the first time – given empirical contents and the feasible areas for future growth of the industry are tentatively determined. One of the main findings of the study is the detecting of considerable unutilized wood reserves in the European USSR. This supports those Soviet views advocating a European-oriented location in investment strategy for the industry, as market and cost factors are unfavourable to Siberian location.

The PDF includes a summary in Finnish.

• Eronen, E-mail: je@mm.unknown

Light and economic FM-CW radar has been developed for controlling the bearing capacity of ice roads and landings on ice used for timber transportation and storage of timber in Finland. It was tested on natural ice and ice roads of three lakes in Southern Finland and one location on sea on the southren coast of Finland (a total of 166 observations). Ice thickness varied from 0 to 100 cm. Correlation coefficient between auger and radar measured ice thickness was r=0.99 and absolute error varied from -10 to +7 cm. The quality of ice had no influence, but by improving the interpretation of results, also the quality factors might be detected.

The PDF includes a summary in Finnish.

• Saarilahti, E-mail: ms@mm.unknown

Questionnaires were sent out to determine the volume of wood harvested from peatlands during 1978 and the harvesting problems encountered. In total there were 110 responses which accounted for 8 million m3 of wood harvested, of which 1.0 million m3 (14%) was harvested from peatlands. The largest proportion of wood harvested from peatlands was during the winter. Most of the respondents reportet that they wait for the soil frost to set before harvesting is started on peatlands. Respondents indicated a total of 263 machines bogging down in to the soil or, for 1978, a total for Finland of 750 to 1,000 machines.
The PDF includes a summary in English.

The PDF includes a summary in English.

• Saarilahti, E-mail: ms@mm.unknown

The aim of the study was to find out the effect of the working place meetings on the increased cooperation between workers and supervisors, the improved work performance, the intensified use of machines and the improved job satisfaction. In the study loggers, forest machine operators and forement were interviewed. The results showed that the working place meeting is a useful means to realise the above-mentioned aims.

The PDF includes a summary in English.

• Kyttälä, E-mail: tk@mm.unknown

The purpose of the present study is to explore the applicability of some methodological approaches to empirical policy analysis in evaluating the effectiveness of public forest policy. From the perspective of effectiveness analysis we can distinguish in forest policy, aiming at the promotion of timber production, two principal objective levels in forestry: the quantity of silvicultural investments and their allocation and the quantity (sufficiency) together with the structure of timber supply. This paper is restricted to the exploration of the effect of forest policy measures directed to silvicultural investments in private forestry. First, the effects of state subsidies in silvicultural investments are analysed. The analysis is macro analysis of quantitative forest policy means, in which aggregated time series data are used as study material. Second, an attempt is made to provide a causal interpretation of the impacts of qualitative forest policy means at the woodlot level. This micro analysis utilizes an approach characteristic to the behavioural sciences.

It is concluded that like quantitative forest policy means the qualitative means, coupled with the activities of the forest promotion organizations, play a significant role in attaining the timber production goals. Of these, the professional advice given by forestry experts, has a direct effect on silvicultural activities. Extension and training activities have an indirect effect by increasing the willingness of forest owners to employ experts on their woodlots.

• Tikkanen, E-mail: it@mm.unknown

On the basis of a limited material, the drying of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) timber at room temperature decreased the thickness of the bark proportionally to the decrease in the moisture content. The decrease was the greatest in the middle portion of the trunk. In the spruce material, the decrease in bark thickness was exceeded by the shrinkage of the wood. During soaking, the bark thickness of both tree species decreased, too, contrary to the presupposed hypothesis. In both cases, the shrinkage was the greatest in the middle portion of the trunk. In the spruce material, the decrease in bark thickness was exceeded by the shrinkage of the wood. Possible explanation for the phenomenon is discussed.

The PDF includes a summary in English.

• Kellomäki, E-mail: sk@mm.unknown

In the first part of the study the hindrance of the remaining trees when felling trees by machines working from the strip road in selective thinning was studied on the basis of the literature. In the second part there was geometrically studied the need of schematic thinning in some type stands when bundles are pre-skidded straight-lined to the strip road. In average only 0-1 trees per pre-skidding trail needs to be removed. It was concluded that trees removed from the pre-skidding trail do not significantly increase the need of schematic thinning. Remaining trees do not limit the length of machine booms if the pre-skidding trails are planned during the felling.

The PDF includes a summary in English.

• Harstela, E-mail: ph@mm.unknown

Material for this study was collected from 26 stands marked for clear cutting in Southern Finland. The volume of decayed Norway spruce (Picea abies (L.) H. Karst.) timber and pulpwood was determined by deducting the volumes of these assortments (as recorded on the measurement certificate) from the volume of the standing trees. To obtain the economic loss, the volume of decayed wood was multiplied by the difference in stumpage prices between spruce timber of pulpwood and pine pulpwood. In the 17 stands of Buyer A the loss in timber volume caused by decay was 5.84% and the loss in stumpage price 2.84 Fmk/m³ (means weighted by volume). The corresponding figures in the 9 stands of Buyer B were 10.87% and 5.50 Fmk/m^3, respectively.

At the mean stumpage price level for the felling season 1977-78 the losses in the stands m.f.c. mentioned above were 2.87% per unit price in the stands of Buyer A and 5.75% in the stands of Buyer B.

The PDF includes a summary in English.

• Tuimala, E-mail: at@mm.unknown

Curly birch (Betula pendula f. carelica Sok.) is characterized by large variations in stem form and the internal structure of the wood, and is generally divided in to four types on the basis of visible external stem characteristics. First plantation experiments in Finland in the 1920’s in experimental areas of the Finnish Forest Institute, had become ripe for cutting and were felled. The study material of this study consists of one 52-year old and three 42–43 -year old stands of curly birch.

The yield suitable for plywood manufacture from the oldest stand was 34,777 kg/ha and that of curly grained branch wood 39,452 kg/ha. The corresponding figures of the other stands were, on average 24,219 and 57,271 kg/ha. The yield from the stands were sold at the present-day price. The result was economically better than from any other forest tree species grown in Finland. The younger stands were obviously cut too early. It was concluded that the genetic quality of the seedlings used in the plantations in the 1920’s and 1930’s was not very high.

The PDF includes a summary in English.

• Raulo, E-mail: jr@mm.unknown
• Sirén, E-mail: gs@mm.unknown

In this paper the system of collective timber price agreement in Norway is described. The history of »collective behaviour» in the roundwood market can be tracked far back in history, with different degrees of importance, and it has totally dominated the price-formation of roundwood from the 1950’s until the present. In trying to answer the question »What has been the effect of the collective price agreements» a few theoretical market models are used and the empirical data are also employed. Both the theoretical discussion and the empirical data seem to indicate that the forest owners are better off with collective price agreements than with a situation where there are no organized price-negotiations.

The PDF includes a summary in English.

• Høsteland, E-mail: jh@mm.unknown

The amounts of harvestable logging residues and stump and root wood were examined in the area where 100,000 solid m³ of stemwood was cut in 1975. The cutting amounts of stemwood from work sites suitable for harvesting of logging residues was 35,000 m³, and suitable for harvesting of stump and root wood 38,000 m³. The increase in the yield of wood (without bark) from logging residues compared with the unbarked stemwood was 2.4%. The same percentage of wood from stump and root wood was 5.0–5.8% depending on the harvesting loss.

The PDF includes a summary in Finnish.

• Mäkelä, E-mail: mm@mm.unknown

The object of the study was to give a tentative indication of the realized economic significance of the principal forest (forestry land) uses in Finnish Lapland. Data concerns the years of the 1970s. Nowadays timber harvesting generates a major part of the total value of production. Recreation (tourism) is in second place. Reindeer husbandry, collection of berries and mushrooms and hunting together produce, in the best years, an output value which is about one fifth of that of timber harvesting. Non-timber uses together produce a rather significant portion on the total value of the integrated forestry output.

The PDF includes a summary in Finnish.

• Saastamoinen, E-mail: os@mm.unknown

This study was carried out on behalf of the Central Association of Finnish Forest Industries (now Finnish Forest Industries Federation) in order to obtain information about the wood raw material situation, to serve, in turn, as a basis for the forest industries’ long-term planning. The study deals with the potential supply of roundwood, industrial residue and forest residue by the year 200 by five wood-supply areas. Examination of the situation during the period of 1972–80 is based on available balances and that concerning the period 1985–2000 in the estimated quantities available for industrial use.

The PDF includes a summary in English.

• Suomen Metsäteollisuuden Keskusliitto, E-mail: –

In this study the area, 8 diameters, and 16 radii were measured of 174 discs representing aspen logs in a mill. The average difference between the largest and smallest diameter was 18 mm, or 7% of the longest diameter. The difference between the largest and smallest radius was 29 mm, or 22% of the longest radius. The diameter was on the average 2.4 mm longer than the two corresponding radii.

The exact area of each disc was measured using a planimeter. In comparison, the area based on the circle formula the diameter being the arithmetic mean of largest and smallest diameters overestimated the area by 1.7%. The results also indicated that the use of random direction in the measurement of diameter overestimated the cross-sectional area on the average by 1.8%.

The study is continuation of the earlier study where the bibliography is presented. As far as the results are comparable, they support each other.

The PDF includes a summary in English.

• Kärkkäinen, E-mail: mk@mm.unknown

The article reviews the position of the Department of Forest Technology in Finnish Forest Research Institute, among Finnish establishments in research on forest work. In addition, it describes the current research programmes of the departments both in wood harvesting studies and studies on silvicultural work. The equitable aims of the former are to increase productivity, lower the cost level, ease the work and improve job satisfaction, as well as to improve the utilization of wood raw material. The latter aims at e.g. improvement of the biological results.

Future prospects are surveyed from the point of view of the goals imposed by the State on the research and, on other hand, the appropriations earmarked for forest work science. A regrettable conflict has arisen between them.

The PDF includes a summary in English.

• Hakkila, E-mail: ph@mm.unknown

The material of this study consists of 1,080 Scots pine (Pinus sylvestris L.) saw logs measures in two saw mills in Northern Finland. The largest and the smallest top-diameter of each log was measured under bark. According to the results, the ovalness was rather small, 1 mm or 4.9% on average. On the other hand, only 14.3% of all logs showed a diameter difference smaller than 2%. The ovalness was larger than 10% in 5.8% of all logs.

The PDF includes a summary in English.

• Kärkkäinen, E-mail: mk@mm.unknown

The aim of the study was to determine the extent to which the cross section of birch (Betula sp.) and aspen (Populus tremula L.) logs differ from a circle and to test some simple methods for measuring the cross-sectional area which can be used, for instance, for determining the volume of the logs. The material consisted of 420 debarked birch disks and 240 aspen disks which were representative of the logs arriving at two factories.

The convex deficit values for the material were very small, the cross-sectional area error being in general less than 1%. On the other hand, the other parameters deviated from the circular form to quite a large degree. It was also evident that the radii measured from the piths to the surface of the wood varied considerably more in the same disk, as regards length, than the diameters measured in different directions.

It was evident that the shape of the average cross-sectional area was not in general elliptical. It thus appears that any method for measuring the cross-sectional area which is based on elliptical formula is not suitable. The method which gave the best result was that in which the cross-sectional area was taken as the average of the area of the circle calculated from the smallest diameter and that calculated from the diameter passing at right angles to it. This method also appeared to be the best for disks which deviated to quite a large degree from the circular form. The suitability of this method is increased by the fact that the relative error is only slightly dependent on the size of the disk.

The PDF includes a summary in English.

• Kärkkäinen, E-mail: mk@mm.unknown

During the next decade there will be a marked increase in the allowable cut in drained peatlands. At the same time, the mechanization in logging proceeds, and in short-distance haulage the use of forwarders will increase. This study, based on literature and some observations, deals with logging conditions in drained peatlands with special reference to the suitability of heavy logging machines for use in such terrain. In addition, soil frost and the bearing capacity of the frozen peat soil were studied.

Freezing of the soil in a drained peatland area depends prevailingly on the weather conditions during early winter. The factors influencing soil freezing of a drained peatland are completely different from those regulating the freezing of natural peat soils. The frost penetrates in general deeper in the drained than virgin peatland. The topmost peat layer does not, however, freeze uniformly. Generally speaking, the bearing capacity of a drained peat soil is lower than that of undrained peat due to lower water content.

It is concluded that heavy logging machines are probably not fitted for use in drained areas on peatland even if the average soil frost values recorded would suggest it. Moreover, because of their extremely superficial root systems, peatland forests are exposed to damages by heavy machines in thinning operations.

The PDF includes a summary in English.

• Hannelius, E-mail: sh@mm.unknown

The planning of timber production in a forestry unit is divisible into two phases. In the first phase, planning provides the decision-maker with a number of possible timber production policies; these policies define the production possibility boundary. After the decision-maker has chosen one of these policies, planning moves to the second phase, in which a detailed programme is prepared with a view to meeting the requirements of the timber production policy accepted. The paper indicates one possibility of solving these two tasks simultaneously. In the first phase, the solution of the primal linear programming problem is employed and in the second phase the respective dual or shadow price solution.

The PDF includes a summary in English.

• Kilkki, E-mail: pk@mm.unknown
• Pökälä, E-mail: rp@mm.unknown
• Siitonen, E-mail: ms@mm.unknown

The paper deals with the optimization of roundwood transport in cases where many destinations for it exist and where several means of transport are available. It is also understood that the capacities of the factories to which wood is transported can be used at varying degree. A model was developed for a case such as Finland which sells most of its products abroad.

In the above case, the optimization of roundwood transport does not necessarily mean minimization of transport costs. What is aimed at is to obtain, by using different combinations (mill destinations and the media of transport) the maximum difference between the allowable cut (calculated) and real (actual) transport costs.

The PDF includes a summary in English.

• Roitto, E-mail: yr@mm.unknown

The study deals with economic significance of forest landscape planning models used in regional planning in Finland. The »judge»-method is used among professional foresters working on private forestry boards in Southern Finland to define their view of what would be moderate level of costs of landscape management for private forest owners. A sample of 154 forest professionals working in district forestry boards in Southern Finland was sent a sociological questionnaire.

It was possible to form three hierarchical moderation classes by statistical grouping of judgement distributions. Prolongations in rotation ages and restrictions concerning ditching of forested bogs, forest read building and clear-cutting were considered the most immoderate models. Rather or wholly insignificant were evaluated such management models, which mean restrictions in »old fashioned» methods or which are already used in practice.

The PDF includes a summary in English.

• Lovén, E-mail: ll@mm.unknown

In this study a formula has been developed to describe the influence of the change of cost level on such a mechanization prognosis, where is assumed that wages and machine costs bear compound interest. In the study there are some numerical examples.

In the formula p1 = annual per cent increase of wages, p3 = annual per cent increase of machine costs, p2 = sudden and incident per cent increase of machine costs, and tv = delay in the profitability of mechanization.

The PDF includes a summary in English.

• Harstela, E-mail: ph@mm.unknown

In this paper the use of butt and top diameters of pulpwood bolts for volume determination is analysed. The study is based on the taper data of Scots pine (Pinus sylvestris L.) stems. According to the results, the use of the mean of butt and top diameters in the volume determination under Finnish condition causes a positive error in small stems. If the stems are so big that the butt portions of the stems can be used as saw logs, the remaining top bolts, used as pulpwood, are estimated to be smaller than they are in reality. Accordingly, there is a negative error.

The PDF includes a summary in English.

• Kärkkäinen, E-mail: mk@mm.unknown

In this literature review some error possibilities in the measurement of solid volume of logs and pulpwood are discussed. Although both underestimation and overestimation can occur for various reasons it seems likely that in the stereometric measurement method the real volume is underestimated, at least when Huber’s formula is applied, and the respective middle form factors are too low. Numerous results of empirical investigations are presented in the paper, too.

The PDF includes a summary in English.

• Kärkkäinen, E-mail: mk@mm.unknown

The task of this study was to gather all available information concerning timber-sales behaviour of private forest owners and to try to find the probable trends in this behaviour. The initiative for the study came from the Central Association of Finnish Forest Industries.

In Finland there are areas of timber savings and those of overcutting. These are mainly explained by regional variation in prosperity of forest owners. There are also several individual factors affecting timber sales behaviour. Without major changes in forest policy the annual variation in quantity cut in Finland is increasing and the degree of cutting seem to remain below the allowable cut.

The PDF includes a summary in English.

• Hahtola, E-mail: kh@mm.unknown
• Järveläinen, E-mail: vj@mm.unknown
• Reunala, E-mail: ar@mm.unknown

The aim of the paper was to analyse, using a computer simulation technique, the moving distance of pulpwood bolts when direct felling of trees is used and the bolts are gathered alongside the strip road. According to the results, the average moving distance of bolts depends in a complicated way on the usable part of the stem and the spacing of strip road. As a rule, the differences between moving distances of two-meter bolts weighted and unweighted by bolt volume of various trees is 0–16% when the strip road spacing is 30 m the reason being the fact that the heaviest butt bolts are often more far away from the strip road than the top bolts.

The PDF includes a summary in English.

• Kärkkäinen, E-mail: mk@mm.unknown

There is no clear picture in Finland of how big the revenues are that the State and the local authorities receive from taxation for the part of primary forestry. Conception of taxation varies from 100% to 50%. The paper presents a comparison between the gross income from timber sales as determined according to the method used at the Central Statistics Bureau and the net revenues as calculated on the basis of forest fee.

At 1920s area taxation was introduced in forest taxation. The system is based on forest types and their timber production capacity. According to the principles of area taxation, no tax is paid for overcuts, whereas timber capital savings should be paid for.

According to the calculations of this study, in 1958–62 the gross income from timber sales was about 506 million Fmk annually in Southern Finland, the costs involved in timber production about 437 million Fmk, and the annual taxable income 231 million Fmk. In the period more valuable timber assortments were harvested than those for which taxes were paid according to the old regulations.

Half a century ago, area taxation was a system suited to its purpose. Now, however, forestry is in the hands of another generation, and accounting has been introduced in practical agriculture and forestry. Therefore, a taxation system based on the real income from timber growing should be introduced. The transition period could even be relatively short. It seems probable that a forest owner does not sell timber at a time when this would be required by silvicultural aspects in order to avoid income taxation, he should have to be present an acceptable working plan.

The PDF includes a summary in English.

• Lappalainen, E-mail: al@mm.unknown

The article is a report of a study tour of five Finnish foresters in Germany on September 27 – October 2. 1971. As in most industrial countries, the recreation use of forests is rapidly expanding and, therefore, its needs are considered in the management of forests. Two examples of intensively used recreation forests are described, Schönbuch near Stuttgart and the Bavarian Forest National Park at the Czechoslovakian border. These forests are effectively used for both timber production and recreation at the same time. Some other effects of urbanization on forests also are discussed in the article.

The PDF includes a summary in English.

• Mikola, E-mail: pm@mm.unknown

The material of 78 damaged Norway spruce (Picea abies (L.) H. Karst.) trees was gathered in Southern Finland in order to clarify the advance of decay. The harvesting which had caused the scars had been carried out 12 years earlier and at the moment of the investigation the growing stand was 110 years old. It was noticed that the variables used could explain only a few per cent of the variation of the advance of decay. It was concluded that the only important thing in practice is whether the injuries are in roots or in stems.

The PDF includes a summary in English.

• Kärkkäinen, E-mail: mk@mm.unknown

The Finnish forest industries have doubled their use of wood raw material during the past two decades. The average annual overcut of 4.0 million m³ in 1960–64 has been turned into an average annual surplus of 2.7 million m³ in 1965–69. By 1974 industry’s requirements for domestic roundwood would increase by about 6.3 million m³, if all new capacity can be taken into full production. The MERA allowable cut, if realized, would leave a 1.5 million m³ annual surplus in the forest balance in 1974. Less intensive forestry programs would mean a 1.5 to 4.4 million m³ overcut in 1974.

The PDF includes a summary in English.

• Linnamies, E-mail: ol@mm.unknown

The mobility of logging tractors was tested in the winter 1969 on difficult snow conditions to gather information for planning of logging operations and for logging machinery design. The tractors tested were Clark Ranger 666, Timberjack C, Valmet Terra, Ford Brunett 5000, Fiskars 510, BM-Volvo SM 660, BM Volvo SM 661, Ford Country 6, MF-Robur I and BM-Boxer T-350.

According to the results, there is a preference of tracked vehicles in difficult snow conditions compared to wheeled tractors. Ford Country with long and bearing full-tracks proved to have the best mobility. On downhill grades it was found significant differences between three-quarter-track-tractors and skidders, although the performance on level ground and uphill grades was relatively similar. The tracked vehicles can easier move on the packed snow layer and reach a higher speed.

The driving speed does not increase significantly until the density of snow has entirely changed through getting wet. Wet top layer of snow affects positively on driving, because it increases packing of the snow. Increasing density of the snow improves especially the mobility of broad-tired wheeled tractors. To be able to predict the driving speed of a tractor in winter working conditions one must know the depth of the snow layer and the density of the snow and the grade of the slope. In addition, the passages on the same route and the packing of the snow must be regarded.

The PDF includes a summary in English.

• Silvennoinen, E-mail: us@mm.unknown
• Haarlaa, E-mail: rh@mm.unknown

The most effective work organization will be used as a goal in minimizing of logging costs. Some type of problem approach is usually utilized. The concept of the ideal system offers a possibility to get guidance in this difficult task. The idea of an ideal system is based on the fact that an ideal system, even imagined, can be utilized for any purpose. There are checklists in handbooks to accomplish the four existing steps: define of function, design ideal, develop optimum and deliver results.

In this paper two special cases are taken up to illustrate the concept itself, and it’s use in design of forestry work organizations. There were found no such reasons which could limit or even prevent the use of this method for forest technological purposes. That is why the author believes the method to give better results than any other customary approach.

The PDF includes a summary in English.

• Haarlaa, E-mail: rh@mm.unknown

The purpose of this study was to explain whether it is possible to affect, in practical working site conditions, by means of logging waste on the strip road, the depth of the track which is formed in terrain transportation and the injuries of the growing stand. Five 20 m long investigation areas with logging waste and five similar areas without logging waste were arranged on one strip road at Teisko logging site in Southern Finland. The logging waste layer was mainly Norway spruce and 10–15 cm thick. A KL–836 B forwarder was used. The type of soil was loam.

The logging waste affected the depth of the track only by decreasing the wear of humus layer. Even decreasing effect of logging waste on the injuries in the growing stand was minor. At Kitee working site in Eastern Finland strip roads were studied. The type of soil was thick, rather mouldered peat. The thickness of logging waste was 3–4 times greater than in Teisko, mainly spruce. A Volvo Nalle SM 460 forwarder was used. The effect of the logging waste on the depth of the tracks was clearly to be noticed. On basis of the appearance of the tracks one could assume that the difference was due to different wear of the humus, and not so much due to the quantity of logging waste that improves the carrying capacity of terrain.

In some extent logging waste was also found to affect the amount and quality of tree injuries. In practical working conditions, the importance might be small, since in the experiments an unrealistically great amount of logging waste was used.

The PDF includes a summary in English.

• Kärkkäinen, E-mail: mk@mm.unknown

Measurement of timber in a vehicle load or in a bundle is best performed at the mill where the measuring of large quantities can be mechanized and sampling is possible. Load measurement methods include calculation of the number of units, measurement of pile volume, weight scaling and determination of solid content in accordance with Archimedes principle by immersion in water. For some timber assortments, load measurement is sufficiently accurate and suitable unit of measure. The accuracy of load measurement can be increased or the result can be converted by sampling to a more appropriate unit of measure.

In load sampling measurement, a sample is taken from the population, and the desired more accurate measurement is made from the sample. The basic measurement for the whole population can be converted into the more accurate measuring unit by means of the ratio between it and the basic measure. Unit, pile and weight sampling can be used. The aim for pulpwood is to calculate the dry matter content without bark, which means that the amount of bark and the dry weight of wood must be determined by sampling.

The size of the sample depends on size of the population, variation of the ratio between the loads, and the accuracy required. As the quantity of wood to be measured decreases, sampling measurement will reduce the measuring costs by up to 80%. In addition, there is saving in costs by rationalization.

The PDF includes a summary in English.

• Leinonen, E-mail: el@mm.unknown
• Rikkonen, E-mail: pr@mm.unknown

The purpose of this study was to answer questions concerning the basic information in planning of timber harvesting, how this information has to be handled, and how the planning of logging has to be combined with other forest management planning.

A deductive research method was used. By analysing a logging plan, prepared for a certain forest area, general conclusions were reached. To prepare the logging plan in connection with the forest management plan, the following information was found to be necessary: boundaries of the area, extent and ownership of the planned area, maps including information of the location of the timber and the conditions for transportation, road network and a reliable picture of the difficulty of the forest terrain.

Based on the material of the present timber harvesting methods it will be possible to predict the logging methods which will be applicable in the near future. The object to be planned has to be divided to operation areas. The amount of manpower and equipment needed can be estimated for each phase of the timber harvesting chain on the basis of the information calculated in this manner. Investments to machines and basic improvement works have to be planned before the effect of planning can be calculated in the logging costs, which are to be minimized. Due to the rapid development of the field, the handling of the material in connection with a forest management plan has to be left partly unfinished since the development of future logging methods cannot be reliably predicted.

The PDF includes a summary in English.

• Haarlaa, E-mail: rh@mm.unknown

The present paper presents studies on the influence of some relatively common defects of Scots pine logs in Northern Finland on both the sawing yield and on the quality of the sawn goods. The study was based on test sawing of 25 logs for each of the defects (upright limb, heart shake and various kinds of wounds and scars) at Karihaara sawmill. The yield was graded into grades used for export timber according to the system of the sawmill. The proportion of the different export grades (U/S), fifths, sixths and culls) were used as characteristics together with the ratio of raw-wood consumption expressed as cu.ft/std.

Upright limbs occurring in a piece of sawn timber was shown to lower its quality to fifth grade in 43.5%, to sixth grade in 46.8% and to the category of culls in 6.5% of all cases. Only 3.2% of the cases the piece remained in U/S-grades. The size of the upright limb was the most important factor lowering the quality and affecting the ratio of raw-wood consumption.

Heart shakes are relatively common defects in pine logs deriving from over-mature trees. The quality-decreasing influence on the sawing yield depends clearly on the length of the shake in the cross-section. The same characteristics also decreases the ratio of raw-wood consumption. In addition, twisting and star shakes are considerably more harmful than straight ones. If rot occurs in connection with shakes, the places marred by the shakes are only capable of yielding sixth-grade sawn goods or culls.

Scar encountered in logs affect the sawn yield and its quality to quite a varying degree, but these defects themselves may also vary considerably both in size and quality. The length of the scar is highly significant as a quality-decreasing factor. If, in addition, rot is encountered, the defect is of a severe nature.

The PDF includes a summary in English.

• Heiskanen, E-mail: vh@mm.unknown

The aim of this paper was to shape and analyse certain alternatives in the development processes in the organization chains of Finnish forestry. The material was collected by analysing market structures and characteristics of competition with regard to raw wood and forest industry products.

The paper presents two alternative ways to rationalize the organization chains between the forest owner’s organizations and forest industry. In the price mechanism of raw wood originating from Finnish private forests there there has been increasing influence of the central organizations of the private forest owners and forest industry. In their relationship, the model of bilateral monopolistic competition can be chosen as a conceptual framework.

Under bilateral monopoly price is fixed as a result of negotiations between competitive parties, and the position and tactics within the negotiations are of great importance for the negotiating parties. Because of the competition, Finnish forest industry cannot compensate the increase in the production costs by raising independently the export prices of its products. This and the fact that the annual earnings of forest workers are fixed by law to the earnings of the workers in wood-processing industry, will cause pressure on stumpage prices.

In the paper two schemes are outlined. In the Scheme 1 a development alternative is described in which the organization chain of private forest owners is supposed to develop to the industry growing direction. In the Scheme 2 the organization chain of private forest owners is supposed to develop to the organizational orientated direction.

It is concluded that as long as the forest owners’ organizational orientated central organization is too weak to form a monopoly as counterweight to the monopsol of forest industry (except the industries of forest owners), it will consider the industry growing direction superior to the organizational orientated alternative.

The PDF includes a summary in English.

• Rinkinen, E-mail: ir@mm.unknown

The present study gives an account of the dependence prevailing between the actual volume of timber crops, and, on one hand, the sum of cylindrical volume of individual trees, and on the other hand, the utilization per cent. This dependence is rectlinear if the volumes in question are calculated on a running-foot basis. The cylindrical volume of individual trees was calculated on the basis of cross-section area at breast height and the height of the trees. On the basis of the results, it seems that it is possible to simplify timber measurement.

The PDF includes a summary in English.

• Nisula, E-mail: pn@mm.unknown

The purpose of this investigation was to study the felling volume and its structure in the State forests of Finland. Special attention was paid on the proportion of waste wood within the felling volume. This information was in demand for the general plan of the State forests that was being prepared at the same time. The survey was performed using a sampling method, and it represented the districts in the northernmost Finland, Ostrobothnia, Eastern Finland and Western Finland of the Forest Services.

The proportion of merchantable timber of the total felling volume was lowest in the northernmost Finland, less than 2/3 of the total cut. In Ostrobothnia the share was ¾, Eastern Finland 4/5 and in Western Finland 5/6. When the tree species were compared, the proportion of waste wood was largest in broadleaved trees, especially in the Northern Finland, while for Scots pine it was lowest. For Norway spruce the share of merchantable timber is markedly lower in the northernmost part of the country, where, for instance, decay increases the proportion of waste wood. For birch, demand of wood influences most the proportion of waste wood.

In general, the proportion of waste wood and merchantable timber in the felling volume was influenced by changes in the demand of timber, structure of the stands, and the felling method. The demand of the timber assortment affects most in the amount of waste wood. The more valuable the timber assortment is, the less waste wood is left in the cutting area.

The PDF includes a summary in German.

• Kangas, E-mail: yk@mm.unknown

A Timber Scaling Committee was appointed by the Government of Finland in 1959, commissioned with the regulations concerning the scaling of timber and to draw a proposal for their amendments. The commission suggest revision of the regulations in their entire extent. The largest alterations should be made in the act which incorporates the provisions concerning the actual technical methods of procedure in measuring. Thus, also amendments were also posed for the Timber Scaling Law and the law concerning the scaling of timber for the purpose of paying wages.

The inclusion of the setting of the grades and quantities are considered important, since most of the disagreements occurring in measuring are concerned with quality of the timber. Inside of the sphere of application of the law would also be settling of the problems of the quality, and the measuring procedure, also when measuring for the purpose of paying wages.

According to the bill, the necessary number of official scalers and scaling boards would be appointed. The duties of the present officers would be changed. In the boards would be presented sellers, buyers, employers and employees besides the chairman. The freedom of contract in the scaling of timber will be preserved from the present law.

The report includes a bill for the Timber scaling Act, a draft for the timber scaling act, and a draft for an act which includes the timber scaling rules.

The PDF includes a summary in English.

• Puutavaranmittauskomitea, E-mail: –

Hydroelectric plants are being planned or already built in Northern Finland. The complete terracing and regulation of watercourses necessary for the power plants will mean great changes in floating conditions and hence for forestry, for which floating is the principal means of transport. Consequently, the Cabinet appointed a committee in 1958 to ascertain the economic, technical and legislative questions connected with timber transport in the area.

The committee has found that about half of the country’s forest area and two thirds of its water power resources are situated in Northern Finland. A prerequisite for the wise utilization of the forest in Northern Finland is an increase in fellings. This can only be put into effect by improving the means of transport, especially the floating channels. The financing required by the organization of floating connected with the building of the hydroelectric power plants amounts to about 10,000 million marks over a period of 20 years.

The committee has suggested that an advisory committee on floating should be established. Its most important task would be to try to produce a general programme for the organization of floating under the changed conditions, and that the State should participate in the expenditure caused by the organization as regards the capital investment needed for changing over to bundle floating.

The PDF includes a summary in English.

• Pohjois-Suomen uitto-olojen järjestelykomitea, E-mail: –

Silva Fennica Issue 92 includes presentations held in 1956 in the 8th professional development courses, arranged for forest officers working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

Fellings of valuable timber in the forests to be surrendered for settlement farms have been discussed widely in Finland. This presentation describes the effects of the new section in the Land Settlement Decree and new directions given by Central Forestry Association Tapio based on the decree. According to the directions, the fellings have to follow legislation concerning other fellings in private forests. The felling of all large, valuable timber, as has previously been the custom in settlement farm forests, does not follow this principle.

• Piepponen, E-mail: pp@mm.unknown

Silva Fennica Issue 92 includes presentations held in 1956 in the 8th professional development courses, arranged for forest officers working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

When resettlement plots have been established in Finland, a so-called household wood principle used to be used: in addition to fields, the new farm has been given forest land enough to supply it household timber. Trees larger than needed for construction of the farm were considered unnecessary, and the valuable timber trees over certain diameter could be harvested by the surrenderer of the land. This has led to fellings at minimum diameter in contrary to rational forest management. The presentation describes new legislation and directions that aim at correcting the situation.

• Hyttinen, E-mail: oh@mm.unknown

Wood demand and practices in the marking of trees for cutting have affected the silvicultural state of the forests of Finland in the early 1900s. The aim of the study was to study the development of timber sales and the marking of trees for logging, with a special emphasis on variation in the volume of the sales and assortment range. The study is based on statistics of the District Forestry Boards and Forest Management Associations about timber marked for cutting in 1931-1953.

The professionals in the District Forestry Boards and Forest Management Associations have marked annually in average 9 million stems of heavy timber and about 7 million m³ of stacked wood for sales. The volume  follows business cycles, the changes in the volume of stacked wood being larger than of heavy timber. When demand was high, the number of professional workers limited the supply of wood. There were large differences in the volumes marked within the country. The share of small diameter stacked wood has increased since 1930s compared to heavy timber.

The article includes a summary in German.

• Yli-Vakkuri, E-mail: py@mm.unknown

The wages of logging and haulage has been dependent on the decisions of foremen. The aim of this study was to provide better insight on how working conditions in a logging site affect productivity of the work. Six working sites operated by Forest Service, Veitsiluoto Oy and Kemi Oy in the communes of Salla, Muonio and Kolari in Lapland were studied. The forests in the area were mostly Scots pine (Pinus sylvestris L.).

The effect of average volume of the stems, the average daily haulage over distances of various lengths, density of the stand and shape of the stem on effectivity was calculated. The size of the team was of considerable importance to the felling and haulage result in the Northern Finland where the feller assists in loading of the logs. One of the aims of the study was to find out what size of team is most advantageous for each haulage distance. The results show the optimum distance of haulage for teams of different sizes.

The article includes a summary in English.

• Maliniemi, E-mail: em@mm.unknown

Silva Fennica Issue 80 includes presentations held in 1952 in the 7th professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation discusses legal cases of the supreme court of Finland that are related to forestry and handle subjects that can be of interest to forest officers working in Forest Service. The subjects vary from sale of timber to unauthorized harvest of timber.

• Komsi, E-mail: tk@mm.unknown

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the development of forest haulage and long-distance transportation of timber. The article gives examples of improving the effectivity of horse hauling, use of tractors, loading of timber and floating, and gives examples of new equipment used in timber transport.

• Kantola, E-mail: mk@mm.unknown

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

Quality grading has been rarely used in pricing of saw logs due to lack of knowledge on how the quality of logs affects the value of the sawn wood. This presentation discusses the subject based on unpublished data professor Ilmari Vuoristo collected in 1930s on effects of timber grading on the quality and value of sawn wood. The quality classification developed by professor Vuoristo is presented.

• Heiskanen, E-mail: vh@mm.unknown

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes benefits of the qualitative classification of saw logs to forest owners and forest industry.

• Heiskanen, E-mail: vh@mm.unknown

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the uses and principles of different kinds of grading of saw logs.

• Heiskanen, E-mail: vh@mm.unknown

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the grading of sawn timber for export and domestic use, and suggests improvements to grading of the sawn products in the saw mills to better answer the needs of export.

• Siimes, E-mail: fs@mm.unknown

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the development of standards for timber grades in Finland, and the present quality grades of raw timber for timber sales from state forests.

• Pöyhönen, E-mail: vp@mm.unknown

Silva Fennica Issue 64 includes presentations held in 1947 in the third professional development courses, arranged for foresters working in the public administration. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service. Two of the presentations were published in other publications than Silva Fennica.

This presentation describes the principles of licence sales of timber in state forests. In this type of timber sales, a local forest officer has granted a licence for sale of wood or other wood products. The article gives a suggestion to improve the practices of the licence sales.

• Wuori, E-mail: ew@mm.unknown

Silva Fennica Issue 64 includes presentations held in 1947 in the third professional development courses, arranged for foresters working in the public administration. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service. Two of the presentations were published in other publications than Silva Fennica. 

This presentation describes budgeting of costs of delivery loggings, which have been at times underestimated in the practical forestry in the state forests.

• Anttila, E-mail: aa@mm.unknown

Silva Fennica Issue 64 includes presentations held in 1947 in the third professional development courses, arranged for foresters working in the public administration. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service. Two of the presentations were published in other publications than Silva Fennica.

This presentation outlines the history of timber sales at delivered price made in state forests, and describes good practices to arrange timber harvesting locally.

• Sopanen, E-mail: es@mm.unknown

Silva Fennica Issue 64 includes presentations held in 1947 in the third professional development courses, arranged for foresters working in the public administration. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service. Two of the presentations were published in other publications than Silva Fennica.

This presentation compares timber sales by delivered price and stumpage sale in the state forest. The buyers of wood have criticised sales bu delivered price from the state forests. The article discusses which of the type of sales is more profitable for the state.

• Pöntynen, E-mail: vp@mm.unknown

The government of Finland appointed a committee to study which method of selling wood, sale at delivered price or stumpage sale, is more profitable method for wood sales from state forests.

According to the committee, in normal conditions, when supply and demand determine the price of timber and forest work wages are dependent on the supply and demand of labour, returns from the sale at delivered price has proved more favourable than stumpage sale. During the World War II the case was, however, the opposite. Sale at delivered price can have also other advantages. The state has by means of logging a hold in the labour market and can use loggings, for instance, to ward off unemployment. Also, loggings can be more easily used in rational silviculture. They keep the supervising staff of forest districts employed throughout the year and provide better professional training for the foresters. In addition, the number of buyers from state forests has increased. The stumpage sale may, however, be good method in certain conditions. The committee states that the State forestry officials are best able to decide on the most favourable method of selling.

The article includes an abstract in English.

• Valtion metsäkauppakomitea, E-mail: –

The aim of this treatise is to describe forests owned by timber companies, their area and position, the quality of forests, the condition of the forests, and fellings carried out during the World War II.

Area of the company-owned forest was 1,95 million hectares, 1,64 million hectares of which was productive and 0,31 hectares inferior forest soil, not including the areas lost after the war. Most of the forests were situated in remote regions. Average volume of the tree stands was slightly larger than in farm-owned forests. Fellings counted for 84% of the growth of the forests.

During the war  the state set felling quotas for both company, private and state forests. It was widely discussed how well they were met by the different owner groups. According to the statistics, the companies had followed relatively closely their cutting plans in peace years. Cuttings were highest in 1939, when the war begun. In the war years 1940-43, lack of workforce, horses and cars for transport complicated logging. The fellings increased again during truce after Winter War. Especially demand for small timber increased during the war. Felling of firewood increased in all the owner groups, in particular in the private forests that were situated near settlements. in general fellings were higher in forests that were easiest to reach.

During the war the companies acquired timber more from their own forests. The fellings from company forests were in war years 70% of those in peace years. The article concludes that companies fulfilled the requirements as well as it was possible in the circumstances.

The article includes an abstract in English.

• Lihtonen, E-mail: vl@mm.unknown

The article is based on studies made in the Karelian isthmus in 1936-1938 before the World War II broke in 1939. Further studies were not possible after the war when the area was handed over to Soviet Union. Economic data of agriculture and forestry of the farms had mostly been regarded separately in the early economic studies of small farms in Finland. This survey aimed at studying influence of forestry in the economy of a small farm. 141 farms were included in a more detailed survey.

Forestry accounted for in average 38% of total income of the farms in 1937-1938. The farms had sold wood often, the amounts being often small. Good transport connections in the area facilitated the sales. Over 70% were sales at delivered price, and about half of the wood was small-sized timber. According to the results of the survey, forestry was important for the small farms in Karelian isthmus. The farmers could not have made a living without the forests. Hoveter, the farms had had to overuse the forest resources. The wood resources decreased by 18-22% in 1922-1938. They were, however, at the same level as in average in Finland in 1938.

The article includes an abstract in German.

• Virolainen, E-mail: jv@mm.unknown

The article is based on the writer’s visits in the area in 1933 and 1939. Pyhätunturi national park was established in 1938. The fell of Pyhätunturi rises up to 540 meters above the sea level, and 357 meters above the surrounding area. The soil is predominantly stony, and the rock is quartzite. The climate is continental with low rainfall. This results in a barren area, where array of plant species is limited with the exception of few gorges with fertile river valleys. The forests have remained mostly in natural state.

Vegetation is arranged in three zones: forested area, subalpine fell birch area and alpine bare top of the fell. Scots pine (Pinus sylvestris L.) forms timberline more often than Norway spruce (Picea abies (L.) H. Karst.). Coniferous forests rise up to 365 meters on the northern slopes and up to about 385 on the southern slopes of the fell. It is followed by fell birch zone (Betula tortuosa, now Betula pubescens subsp. Czerepanovii) up to about 450-475 meters on the eastern and northern slopes, and 475-490 meters on the western slopes. The most common forest site type is Empetrum-Myrtillus site type. Herb-rich spruce swamps along the rivers have highest diversity of species. The article describes the plant species found in forests, peatlands, fell birch zone and top of the fell in detail. In all 162 different vascular plant species and 16 non-indigenous species were found in the area.

The article includes an abstract in German.

• Kalliola, E-mail: rk@mm.unknown

Silva Fennica issue 52 includes presentations held in professional development courses, arranged for foresters working in public administration in 1938. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the conditions according to which the state can reclaim valuable timber-trees on forest land which ownership is transferred to landless population in settlement work.

• Jokinen, E-mail: pj@mm.unknown

Silva Fennica issue 52 includes presentations held in professional development courses, arranged for foresters working in public administration in 1938. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the history of road transport of timber in Finland and discusses its significance and potential to forestry in the state forests.

• Seppänen, E-mail: os@mm.unknown

Silva Fennica issue 52 includes presentations held in professional development courses, arranged for foresters working in public administration in 1938. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the Timber Measurement Act, adopted in 1938, and its application.

• Mecklin, E-mail: am@mm.unknown

An act passed by the government of Finland in 1922 prescribed that state-owned forest lands will be parcelled out to landless population. A survey was made in 1934-1935 by Forest Service (Metsähallitus) to investigate the success of the establishment of settlements, and which disadvantages it may have had in forestry in the state forests. In the survey 1,194 farms were inspected.

According to the directives of settlement, the farms should be able support a family of four adults. The area of arable land was in average 5-15 hectares. In addition, the farm should have pasture and forest enough to supply it most of the household timber. According to the study, the regulations had been applied variably. Usually the farms had been given more land than was required. It was estimated that farms had been given 110,000 hectares more forest land for gathering household timber than required in the act. Many farms had sold timber, in some cases to that extent it endangered supply of household timber.

Parcelling out land had affected the management of state forests. If a region had surrendered large forest areas for settlement, it could not follow its cutting plan. Also, there was relatively little state-owned forests in southern Finland, and the effects of parcelling out land were stronger. The report concludes that in general it was not appropriate to parcel out forest land. The execution of settlement should have beeb given to Forest Service.

The article includes a German summary.

• Jokinen, E-mail: pj@mm.unknown

Silva Fennica issue 42 includes presentations held in professional development courses, arranged for foresters working in public administration in 1936. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service

This presentation describes how pruning is used to produce quality timber.

• Lappi-Seppälä, E-mail: ml@mm.unknown

Silva Fennica issue 42 includes presentations held in professional development courses, arranged for foresters working in public administration in 1936. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service

This presentation describes determination of stumpage prices in timber sales of the state forests in Finland.

• Mecklin, E-mail: am@mm.unknown

The issue 39 of Silva Fennica includes presentations held in professional development courses in 1935 that were arranged for foresters working in public administration. The presentations focus on practical issues in forest management and administration, especially in regional level.

This presentation describes methods of forest management that lead to production of qood quality timber, needed in the saw industry.

• Laitakari, E-mail: el@mm.unknown

The issue 39 of Silva Fennica includes presentations held in professional development courses in 1935 that were arranged for foresters working in public administration. The presentations focus on practical issues in forest management and administration, especially in regional level.

This presentation describes the quality of timber and coniferous forests in the point of view of saw industry.

• Vuoristo, E-mail: iv@mm.unknown

Majority of the timber floated in Finland has been floated loose. Repair of the floating channels in the end of 1800s decreased the amount of sunken logs and loss of timber during the transportation. The increase of floating of pulpwood and other small timber has later increased the number of sunken logs. More information is needed on the amount and quality of floated timber, also the floating channels should be classified. A detailed study plan to investigate how big proportion of the timber is lost during floating, which factors influence the sinking of timber, and how the timber dries in the forest depots is presented. A classification of timber by its floatability is presented.

The PDF includes a summary in German.

• Lassila, E-mail: il@mm.unknown

The objectives of the paper were to find out structure of the sawing time when using field circular saws, influence of the different factors on the sawing time and its structure, average sawing time per unit of raw material and sawn goods, and the fundamentals for the creation of an equitable system for the determination of the basis of payment in sawing work. The observations of the time study were made on both a single log and a work period basis. The material was collected using four saws of different brands.

The results showed that the season when the work was done, and top diameter of the logs to be sawn affected the constant times included in the total sawing time and the time used for sawing of center pieces. While the tree species did not affect the constant times, the grade of the logs of different tree species did have effect, especially in winter sawing. The factors affecting the different phases of the work are described in detail. The length of sawing time was longer in the winter than in the summer. The preparatory jobs in sawing required in average 82 cmin per log, and the time increased with increasing top diameter. The actual sawing is the most time-consuming part of the work, it took in average 132 cmin. 

The PDF includes a summary in English.

• Granvik, E-mail: bg@mm.unknown

The objective of the present investigation was to clarify the profitability of pruning silver birch (Betula verrucosa, now Betula pendula Roth) in the growing of raw material for veneer industry. Calculations were made on the grade, value, and price of pruned and untreated butt logs as well as on costs of pruning and the development of pruned trees.

The grade distribution of unpruned veneer butt logs, the grade distribution of the veneer yield, and consequently, the value of veneer yield and log prices at the plant are considerably better than those of average logs. The grade, value and price increased with increasing diameter. The value and price of pruned butt logs depended primarily on the difference between the turning pruning diameters, and their increase with decreasing pruning diameter and increasing turning diameter. The value of pruned butt logs is always considerably higher than that of unpruned logs. The increase in the value correlates to the pruning and turning diameters, and is, for example, in rotary-cut logs which have been pruned when 10 cm in diameter 80–130%.

Pruning increases the stumpage in naturally regenerated silver birch stands on Oxalis-Myrtillus site by 2,000–3,000 Fmk/ha when employed at 20 years of stand age and rotary cutting at 60–80 years of age respectively. The average pruning costs on Oxalis-Myrtillus site are 51–57 Fmk/ha.

The PDF includes a summary English.

• Heiskanen, E-mail: vh@mm.unknown

The objective of the study was to establish the influence of the founding density of a stand and the intensity of intermediate cutting on the quality of pine saw logs stems, primarily on their branchiness. Measurements were carried out in 68 Myrtillus-type and 32 Vaccinium-type Scots pine (Pinus sylvestris L.) stands. The quality of 1,982 sample trees was assessed.

According to the results, the branchless part of the stem is longest in the older age classes of trees. In all age classes the percentage of the branchless part is highest in medium sized stems. The relative height of the crown limit is greatest in small diameter classes and continues as the thickness of the tree increases. The crown is longer in the thicker tree. The grade of the butt log is on average highest in medium sized stems. Knottiness of a log made it unsuitable for a saw log only among the thickest stems. The relative share of the u/s grade decreased as the thickness of the trees increased.

From the point of view of early development of the trees it was concluded that in all age classes the branchless part is the shorter the faster the tree has grown in diameter when it was young. Also, branches of the butt log are the bigger the faster the tree has developed when it was young. The grade of the butt log improves as the thickness of the annual rings diminishes.

To produce good quality sawn timber, the pine stands should be established dense, and the first thinnings should be delayed as much as possible. The best time for the thinning would be when the diameter of the dominant trees at stump height is 12–15 cm and when all the branches have died on the length of the butt log. After the first thinning, comparatively intense intermediate thinning may be applied.

The PDF includes a summary in English.

• Heiskanen, E-mail: vh@mm.unknown

Seasonal variation in the sawmill industry of Finland was studied in an investigation based on questionnaires answered by a random sample of sawmills concerning the time period of 1958-1960. The method is described in detail in a separate article in Acta Forestalia Fennica issue 75 no. 1.

The seasonal variations in purchase of roundwood was largest in big sawmills, which purchase the main part of the timber as standing sales and buy most of the wood from the State Forest auctions at the end of September. Also, they can afford to reserve their material earlier than the smaller companies. The saw logs are mainly felled in the winter in Finland because the climatic conditions and availability of labour are best at that time. Small sawmills begin fellings a little earlier than the larger ones.

In long-transport of timber the proportion of floating decreased from 47% in 1958 to 38% in 1960. At the same time, proportion of truck transport increased from 48% to 55%. Small sawmills use almost exclusively land transport. They received almost three-fourths of their logs between January and May, because the sawing is concentrated in the first half of the year. Therefore, floating does not suit for their transport method. The larger the sawmill, the later is the seasonal peak of log deliveries. The output of the big sawmills is distributed more evenly thoughout the year. The smaller the sawmill, the quicker is the turnover of raw material and the smaller the sawlog inventories.

The seasonal variation in output is sharper at small sawmills where sawing is concentrated in the first half of the year. The seasonal peak of the early spring is due to the aim at getting the sawn wood to dry early enough for shipments in the summer. Air drying takes an average of 4 ½ months. Kiln drying is more common at the larger sawmills, and gives them more flexibility. Due to the large seasonal variation in operation, the capacity of the small mills is poorly utilized. Domestic sales of sawn wood levels up the seasonality of the deliveries. Export sales are concentrated at the end and turn of the year. Also, the seasonal peak of expenditure occurs in the winter, but that of income in the summer.

The PDF includes a summary in English.

• Ervasti, E-mail: se@mm.unknown

The present investigation is concerned with the price elasticity of sawn wood, concentrating on the price elasticity of sawn wood supply for export. The supply of sawn wood for export is referred to the joint attitude to price changes of all producers participating in the market.

The study concludes that producers cannot in the short- and medium-term view use the price parameter to increase total utilization in the sawn wood market. Demand holds a primary position in price formation. The capacity reserve of the sawmills permits great variations in output at the mill level, and thus elasticity in the supply of sawn wood. High timber costs are typical for the industry. Supply of roundwood can easily be adapted even to large variations in demand. The price elasticity of roundwood supply is rather great.

The long process of sawn wood production and the resulting relatively long lead-time of deliveries result in a long adaptation time of supply. Expansion and contraction of sawn wood exports cause, via the effect of exports, on income similar fluctuations in the domestic sales of sawn wood. This weakens the price elasticity of exports in some degree.

The ‘instantaneous elasticity’ upwards of sawn wood supply might be great, but speculation with stocks at the different levels of production often makes it ‘incalculable’. The price elasticity of a medium-long and long period can be expected to be relatively great upwards. The downward elasticity of a period of medium length is probably small. The elasticity of a prolonged period may be influenced by the substitution of other materials for sawn wood.

The PDF includes a summary in Finnish.

• Holopainen, E-mail: vh@mm.unknown

This paper concentrates on the roundwood commerce in Western Europe as seen from the point of view of Finland, considering the role of Eastern Europe. The first part analyses exports and imports both quantitatively and qualitatively, and the balance of the trade in the export countries. Second part covers the new market groups in Europe and the opportunities for a common market.

Arter the Second World War, a surprisingly large trade in roundwood reappeared in Europe. The European countries exported in average 11 million m³ of roundwood annually, of which 4.3 million m³ was pulpwood, and 2.8 million m³ pitprops. Finland leads exports during the 1950s with a yearly average of 4.2 million m³, followed by France and Sweden. Western Germany is the largest importing country with a negative balance of 2.8 million m³. It is concluded, from a theoretical point of view, that in Western Europe only Finland can maintain a large roundwood export. From a national point of view, however, it would be more favourable to expand the countries’ own refining industries.

On the whole, it seems as if the European roundwood trade should continue on a rather large scale during the 1960s, partly because the border trade can be expected to increase, with a freer trade, and partly because the European timber deficit needs filling from sources outside Europe. In addition, the pulp industries in the importing countries will compete more and more keenly with the exporting countries for pulpwood supplies.

The PDF includes a summary in Finnish.

• Runeberg, E-mail: lr@mm.unknown

This study concentrates on claims made against Finnish shippers or referred to arbitration by foreign buyers. The material is collected from two inquiries on claims and arbitrations, sent by the Finnish Sawmill Owners’ Association to Finnish sawmills engaged to exportation in 1954 and 1958.

On average the claims concerned about 5% of the sawn goods exported from Finland. They affected about 3% of the deliveries from the large sawmills, 10% of the deliveries of medium-sized sawmills and 15–20% of the small sawmills. In large consignments of raw material, variations in quality are not so marked as in smaller ones. Also, the grading of goods is stricter in the larger sawmills, and as they have well-established business relations, they have better opportunities to select goods with a view to demand of the buyer and the marketing areas.

The ratio of goods claimed was least in exports to remote countries, on the Western European markets in exports to Great Britain and the Netherlands. In Belgium, the ratio was high. In 1954 and 1958 approximately 12% of the claims were referred to arbitration. The bigger the sawmills, then on average the smaller the ratio of cases of arbitration in the number of claims. In Belgium, disputes have had to be settled by arbitration most frequently. Over 90% of the claims were made because of defects in quality or condition. About 5% were in respect of the specification of dimensions, and only 5% were related to other reasons than the good themselves. The sums paid for claims connected to the goods in 1958 represented only 54% of those demanded by the buyers. It would perhaps be advisable to consider the formulation of generally acceptable rules of the grading of export timber according to categories of shippers with definition of the minimum standard for each grade.

The PDF includes a summary in English.

• Ervasti, E-mail: se@mm.unknown

The present investigation set out to find out the structures of supply and demand, channels and methods of marketing, developments in marketing methods, trade customs, similarities and differences in marketing of the private forest owners and the State, local features of the market of domestic roundwood trade in Finland, and compares marketing of unprocessed wood between Finland and Scandinavian countries. The study is based on statistics of various sections of trade and from the State Boards of Forestry.

The channels of marketing from private forests in Finland and the Scandinavian countries are different. In Norway the wood is primarily marketed through the forest owners’ associations, in Finland direct individual selling is applied, while in Sweden both channels are common. In Norway and in Sweden the forest owners’ marketing organizations were probably formed mainly to protect the forest owners’ interest in price formation. The price is determined on the organizational level, while in Finland the price formation mechanism has retained a competitive nature. In Sweden the creation of demand for roundwood has been one reason for establishment of the associations, which have established new forest industry particularly in areas of low demand.

The institutions affect also the trade customs in Norway and Sweden. For instance, measuring of roundwood is performed in Scandinavia according to detailed public regulations and often carried out by the officials of special measuring boards. The Forms Committee has also since 1950 brought significant unification in the trade customs of Finland. Greatest differences in trade customs between the State and private forestry is observed in Finland.

The producer’s role in marketing has increased since 1930s, which is demonstrated by the increasing activity in marketing by the forest owners’ associations in Norway and Sweden. Also, the relative importance of sales with contract for delivery has been growing. A second line of development appears in the more detailed norms in trade customs.

The PDF includes a summary in Finnish.

• Holopainen, E-mail: vh@mm.unknown

Roundwood statistics are essential in a country such as Finland, where the roundwood market costitutes one of the most important internal markets. Determining the price level of roundwood can, however, be problematic due to the difficulty of the empirical determination. The main difficulties are the many timber assortments, quality differcences within a timber assortment, large variation of local prices due to variations in demand and harvesting conditions and in sales methods. The article discusses these problems from the perspective of composing a roundwood statistics for different timber assortments that would allow local and temporal comparison of the prices. It seems impossible to compose price statistics that could eliminate totally the variation in the material, transport conditions and demand fluctuations caused by technical development. However, one can suffice to a compromise that would eliminate the major disturbances and take into account other factors that are not related with market when studying the price series. In addition, the paper discusses methods for calculation of price indices.

The PDF includes a summary in Finnish.

• Holopainen, E-mail: vh@mm.unknown

The investigation examines export sales of Finnish sawn softwood sales in 1951-1958, concentrating on the volume of the sales. The material was collected from the archives of Finnish Sawmill Owner’s Association and the Finnish Sawmill Control Organization and the annual reports of the former. Correlation analysis was used in assessing the interdependence of the monthly sales volume and the price, and opening sales and the total sales volume of the year.

A slightly negative correlation was seen between the sale price and the monthly sales volume. Goods sold at under average prices are more abundant than goods sold at over average prices. Generally, with a rising price trend, the annual sales volume increased, but with falling prices the situation was reverse. The sales volume has been dependent on the business cycle development of prices. There was positive correlation between the opening sales and the total sales quantity for the year. The sales volume was at its maximum in the period between November and January, and at the minimum between March and September.

The time of the sales made to different countries differed little judged by quarterly statistics. It seems that the major shippers have generally concluded opening sales first. Northern Finnish shippers and the small shippers of Southern Finland have sold proportionately least during the last quarter. In general, the poorer the qualities in question the smaller on an average the proportion of opening sales but the greater the share of clearance sales.

The PDF includes a summary in English.

• Ervasti, E-mail: se@mm.unknown

The aim of the investigation was to estimate the changes in the price ratios of different tree species of sawn timber, timber sizes and qualities, the ratios of the prices obtained by different shippers and from different countries, and their changes, especially the trends and business cycles. The data can be utilized in the organization of sawing and the drawing up of the price scales. The price ratios were calculated by taking 100 as the basic quantity and calculating the values for the other quantities accordingly, the values are called price indices. The data is collected from the sales reports in the archives of the Finnish Sawmill Owners’ Association.

Comparing the ratios of the basic prices, the prices of unsorted pine goods by shipper B (the leading marks of Northern Finland), were considerably higher than the others. The North Finnish pine goods are of the best quality in Finland. The price differences between the other shippers were small. The prices of unsorted spruce goods differed very little with different shippers. In some years the basic prices obtained for pine from different countries showed considerable differences although, in the overall view, the differences were small.

In the leading marks of Northern Finland, the differences between pine and spruce prices was greater than the other price differences. The quality of pine logs in Northern Finland is extremely high. During the periods of prosperity, the price difference between pine and spruce was relatively smaller than during depression. With spruce goods, the relative price difference for the qualities is smaller than with pine goods. For the both species the relative price differences diminished with the increase in the basic price. In the broadest sizes of unsorted pine goods, the price difference of the inch class is much bigger than in the small sizes. This is true especially for boards. The relative price difference between boards and battens increased distinctly with the advance in the basic price. A similar, though not as clear change took place in the price ratio of board and 7” sizes. The price differences between battens and boards are much smaller for spruce than for pine. The trends of the price indices of the different sizes show from the middle of 1920s and as far as the 9” u/s pine sizes very gentle, and in regards of the corresponding spruce sizes, a fairly sharp rising tendency.

The PDF includes a summary in English.

• Ervasti, E-mail: se@mm.unknown