Articles containing the keyword 'sahat'
Category : Article
A mathematical model was developed for determining the value of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) stems on the basis of sawing and pulping. The model was based on selling prices of sawn goods, pulp and other products as well as processing costs. Sawing was applied to large-dimension parts of stems and pulping to other parts and small stems. Bark and other residues were burned. The quality of pine stems was described by the distance of the lowest dead branch. In spruce only stem size affected the quality-
According to the results, the size of stem affects considerably the value of pine stems and clearly that of spruce stems. The main reason is an increase in the productivity of frame sawing as the stem size increases. In pine another factor is the higher price of sawn goods. The effect of pulp price increases as the stem size decreases. Even in large sized stems the effect of pulp was notable as the value of chips and saw dust was determined on the basis of product values in export. The competition ability of mechanical pulp was greatly affected by the price of electricity.
The PDF includes an abstract in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
Totally 653 battens and planks sawn from butt logsof Scots pine (Pinus sylvestris L.) were chosen from 3 saw mills. The sawn goods were sorted according to normal sorting principles. In order to determine growth rate in the youth, the mean value of the average ring width was measured at the butt end at various distances from the pith.
The average ring width increased as the quality of the sawn goods decreased. The difference between the quality classes in ring width was measured between 2 and 4 cm from the pith. As the size of sawn goods, and, simultaneously, the log size increased, the average ring width increased in a given quality class. Research reinforced previous results, in which slow diameter growth of young Scots pines has been shown to reflect the good quality of sawn goods.
The PDF includes a summary in English.
-
Halinen,
E-mail:
mh@mm.unknown
A test sawing was made of 807 Scots pine (Pinus sylvestris L.) saw logs of varying size and quality. The most important knot characteristic affecting the value of sawn goods was the diameter of the thickest dry knot. The new minimum requirements for pine logs were proposed on the basis of top diameter of the log and the diameter of the thickest dry and living knot.
The PDF includes a summary in English
-
Kärkkäinen,
E-mail:
mk@mm.unknown
- Halinen, E-mail: mh@mm.unknown
In order to evaluate the strength properties of boards made from small and large Norway spruce (Picea abies) butt logs, 15 small (top end diameter 13 cm) and 15 large (top end diameter 25 cm) logs were sampled from a sawmill in Finland. From each log two test pieces were made in order to measure the bending and compression strength, dry density and average ring width.
The boards from small logs were stronger and their density higher. When the differences between groups were analysed it was found that the strength was determined by the density and ring width. When the density was kept constant, the increase in ring width had a decreasing effect on the strength properties. Because there was a negative correlation between ring width and density, ring width alone had a great effect on the strength properties.
The PDF includes a summary in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
- Hakala, E-mail: hh@mm.unknown
The purpose of this study was to measure workers’ exposure to MCPA and glyphosate when sprayers connected to the brush saws was used. A non-pressurized sprayer with a pump and a pressurized sprayer where dosage was regulated with manual control were studied. Exposure was measured from the breathing zone and urine samples.
MCPA collected from the breathing zone gathered into alcohol was 0.05 mg/m3 for the pressurized sprayer, 0.02 mg/m3 for the non-pressurized sprayer, and 0.04 mg/m3 (average) for both types of sprayers together.
MCPA in the breathing zone, collected from splashes and fog into a glass fibre filter, was 0.18 mg/m3 for the pressurized sprayer, 0.09 mg/m3 for the non-pressurized sprayer, and 0.12 mg/m3 for both sprayers used together. Glyphosate in the breathing zone, collected into sodium hydroxide was below 0.05 mg/m3.
In five urine samples taken after the work day there was on the average 0.4 mg/l MCPA, while in 21 samples the MCPA contents were under the definition limit (0.2 mg/l).
The PDF includes a summary in Finnish.
-
Kangas,
E-mail:
jk@mm.unknown
- Klen, E-mail: tk@mm.unknown
The material of this study consists of 1,080 Scots pine (Pinus sylvestris L.) saw logs measures in two saw mills in Northern Finland. The largest and the smallest top-diameter of each log was measured under bark. According to the results, the ovalness was rather small, 1 mm or 4.9% on average. On the other hand, only 14.3% of all logs showed a diameter difference smaller than 2%. The ovalness was larger than 10% in 5.8% of all logs.
The PDF includes a summary in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
This investigation studies the effect of the retail price and the technical properties of preference ordering of buyers of power saw. According to the model derived, the preference ordering of power saws is due to technical properties xj. If no such restrictions in the function are supposed that could have bearing on the preferences of the buyers, there may be N ! possible combinations, when there are N power saws. If one can presume that each price corresponds with a technical level it is possible that each buyer has an optimum price of his own. The bigger the difference between the optimum and actual price, the less preferred the actual power saw is. In this case one may notice the amount of possible orderings is much less than that based on the model. Thus, the mode may be used.
In this paper some models are presented for cases when only n pieces of the population of N power saws are studied. 16 power saws of differing ages and technical levels were investigated. It was noted that many criteria of technical goodness were positively intercorrelated. The price correlated positively with every criterium used. According to the profile analysis, it was concluded that there were many development lines. For example, the idea of a light and the idea of an effective power saw.
According to the principal component analysis, it seemed obvious that there was little room for one- or two-dimensional preference ordering by the technical properties and price.
The PDF includes a summary in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
The present paper presents studies on the influence of some relatively common defects of Scots pine logs in Northern Finland on both the sawing yield and on the quality of the sawn goods. The study was based on test sawing of 25 logs for each of the defects (upright limb, heart shake and various kinds of wounds and scars) at Karihaara sawmill. The yield was graded into grades used for export timber according to the system of the sawmill. The proportion of the different export grades (U/S), fifths, sixths and culls) were used as characteristics together with the ratio of raw-wood consumption expressed as cu.ft/std.
Upright limbs occurring in a piece of sawn timber was shown to lower its quality to fifth grade in 43.5%, to sixth grade in 46.8% and to the category of culls in 6.5% of all cases. Only 3.2% of the cases the piece remained in U/S-grades. The size of the upright limb was the most important factor lowering the quality and affecting the ratio of raw-wood consumption.
Heart shakes are relatively common defects in pine logs deriving from over-mature trees. The quality-decreasing influence on the sawing yield depends clearly on the length of the shake in the cross-section. The same characteristics also decreases the ratio of raw-wood consumption. In addition, twisting and star shakes are considerably more harmful than straight ones. If rot occurs in connection with shakes, the places marred by the shakes are only capable of yielding sixth-grade sawn goods or culls.
Scar encountered in logs affect the sawn yield and its quality to quite a varying degree, but these defects themselves may also vary considerably both in size and quality. The length of the scar is highly significant as a quality-decreasing factor. If, in addition, rot is encountered, the defect is of a severe nature.
The PDF includes a summary in English.
-
Heiskanen,
E-mail:
vh@mm.unknown
The purpose of this investigation was to construct a procedure for measuring the profitability of the use of waste wood. The average price a sawmill gets from the waste wood depends, on the amount of use compared with the waste wood output, and on the composition of waste wood. Production of different kinds of waste wood presupposes investments, therefore, the size of a sawmill, in addition to its location, affects the composition. The data was collected by mailing a questionnaire through the central organizations of the sawmill industry in 1959.
The amount of waste wood per standard of sawn wood increases with the size of the sawmill. Because small sawmills cannot generally use or sell their waste wood, they strive at using the raw material effectively. In addition, they produce much rough-edged sawn wood, and sorting is not as strict as at large sawmills. They also leave their sawn wood untrimmed.
Finland’s pulp industry has expanded significantly since 1958. This has increased the need of raw wood, and the demand of sawmill waste. An additional data collected showed that in 1958 there was about 150 and in 1963 about 200 sawmills delivering waste wood to the forest industry. The amount of waste wood used as raw material compared with the total waste wood utilization had increased about 10% during the period. The production of cellulose chips became profitable when the annual output of sawn wood of a sawmill exceeded 1,000-2,000 stds. The size structure of the sawmills affects the regional usage of the waste wood.
The PDF includes a summary in English.
-
Rinkinen,
E-mail:
ir@mm.unknown
The aim of the study was to compare the newly introduced brush cutter to ordinary hand tools in clearing of cutting areas and thinning young birch (Betula sp.) and Scots pine (Pinus Sylvestris L.) stands. Working with a prototype of the brush cutter, Brushmaster, reduced the total working time by 15-20% compared to bush knife and axe, in spite of the cutter’s weight. At rainy weather the advantage of Brushmaster dissapeared because of clogging of the cutter’s air filter. The prototype proved to be more effective when clearing a cutting area, and hand tools seemed to be faster if damage to the remaining trees have to be avoided.
In addition, eight either lighter or more effective motor saws or brush cutters were compared mutually, and the effect of motor effect, weight, handiness, arrangement of suspenders and handles is discussed. With these improved types of the cutter it was possible to shorten the total working time in thinning of stands (mostly clearing of young stands) to 30-40% of the total working time compared to hand tools. The most modern saws appeared to be best adapted in clearing cutting areas.
The article includes an abstract in English.
-
Sirén,
E-mail:
gs@mm.unknown
Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.
This presentation discusses accuracy of the quality grading of Scots pine (Pinus sylvestris L.) saw logs suggested by professor Ilmari Vuoristo based on a data collected by Valtiala. According to the study, greatest inaccuracies in the grading by visual inspection was caused by differences between the evaluators.
-
Heiskanen,
E-mail:
vh@mm.unknown
Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.
Quality grading has been rarely used in pricing of saw logs due to lack of knowledge on how the quality of logs affects the value of the sawn wood. This presentation discusses the subject based on unpublished data professor Ilmari Vuoristo collected in 1930s on effects of timber grading on the quality and value of sawn wood. The quality classification developed by professor Vuoristo is presented.
-
Heiskanen,
E-mail:
vh@mm.unknown
Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.
This presentation describes benefits of the qualitative classification of saw logs to forest owners and forest industry.
-
Heiskanen,
E-mail:
vh@mm.unknown
Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.
This presentation describes the uses and principles of different kinds of grading of saw logs.
-
Heiskanen,
E-mail:
vh@mm.unknown
Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.
This presentation describes the grading of sawn timber for export and domestic use, and suggests improvements to grading of the sawn products in the saw mills to better answer the needs of export.
-
Siimes,
E-mail:
fs@mm.unknown
Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.
This presentation describes the development of standards for timber grades in Finland, and the present quality grades of raw timber for timber sales from state forests.
-
Pöyhönen,
E-mail:
vp@mm.unknown
The issue 39 of Silva Fennica includes presentations held in professional development courses in 1935 that were arranged for foresters working in public administration. The presentations focus on practical issues in forest management and administration, especially in regional level.
This presentation describes the quality of timber and coniferous forests in the point of view of saw industry.
-
Vuoristo,
E-mail:
iv@mm.unknown
Category : Article
The objectives of the paper were to find out structure of the sawing time when using field circular saws, influence of the different factors on the sawing time and its structure, average sawing time per unit of raw material and sawn goods, and the fundamentals for the creation of an equitable system for the determination of the basis of payment in sawing work. The observations of the time study were made on both a single log and a work period basis. The material was collected using four saws of different brands.
The results showed that the season when the work was done, and top diameter of the logs to be sawn affected the constant times included in the total sawing time and the time used for sawing of center pieces. While the tree species did not affect the constant times, the grade of the logs of different tree species did have effect, especially in winter sawing. The factors affecting the different phases of the work are described in detail. The length of sawing time was longer in the winter than in the summer. The preparatory jobs in sawing required in average 82 cmin per log, and the time increased with increasing top diameter. The actual sawing is the most time-consuming part of the work, it took in average 132 cmin.
The PDF includes a summary in English.
-
Granvik,
E-mail:
bg@mm.unknown
Seasonal variation in the sawmill industry of Finland was studied in an investigation based on questionnaires answered by a random sample of sawmills concerning the time period of 1958-1960. The method is described in detail in a separate article in Acta Forestalia Fennica issue 75 no. 1.
The seasonal variations in purchase of roundwood was largest in big sawmills, which purchase the main part of the timber as standing sales and buy most of the wood from the State Forest auctions at the end of September. Also, they can afford to reserve their material earlier than the smaller companies. The saw logs are mainly felled in the winter in Finland because the climatic conditions and availability of labour are best at that time. Small sawmills begin fellings a little earlier than the larger ones.
In long-transport of timber the proportion of floating decreased from 47% in 1958 to 38% in 1960. At the same time, proportion of truck transport increased from 48% to 55%. Small sawmills use almost exclusively land transport. They received almost three-fourths of their logs between January and May, because the sawing is concentrated in the first half of the year. Therefore, floating does not suit for their transport method. The larger the sawmill, the later is the seasonal peak of log deliveries. The output of the big sawmills is distributed more evenly thoughout the year. The smaller the sawmill, the quicker is the turnover of raw material and the smaller the sawlog inventories.
The seasonal variation in output is sharper at small sawmills where sawing is concentrated in the first half of the year. The seasonal peak of the early spring is due to the aim at getting the sawn wood to dry early enough for shipments in the summer. Air drying takes an average of 4 ½ months. Kiln drying is more common at the larger sawmills, and gives them more flexibility. Due to the large seasonal variation in operation, the capacity of the small mills is poorly utilized. Domestic sales of sawn wood levels up the seasonality of the deliveries. Export sales are concentrated at the end and turn of the year. Also, the seasonal peak of expenditure occurs in the winter, but that of income in the summer.
The PDF includes a summary in English.
-
Ervasti,
E-mail:
se@mm.unknown
The purpose of this paper is 1) to establish the possible seasonal variation of the different phases of work in the sawmill industry in Finland, 2) to study the internal and external factors influencing the seasonal character of the sawmill industry, 3) to study ha time lags between the work phases of the sawmill industry, 4) to analyse the seasonal nature of the industry’s money transactions, and 5) to give information concerning the factors influencing employment. The investigation is based on questionnaires of a random sample of sawmills concerning the time period of 1958-1960. This paper concentrates on the methods of the study, the results are reported in a separate paper in the Acta Forestalia Fennica issue 75 vol 1.
It was concluded that if seasonal variation in the sawmill industry is to be analysed on the scale it has been in the present work, sampling is the cheapest and most practicable method of collecting the material. If seasonal fluctuation of the industry is to be calculated by size classes, the sample must be allocated into strata by measuring the heterogeneity of the classes with a parameter illustrating seasonal variation. It might be useful to apply these parameters already when the total size of the sample is determined. For the smallest sawmills, for which practically all data have to be collected from primary documents, the most practical method is perhaps to send collectors to the spots. To the larger sawmills the questionnaire can perhaps be sent by mail. A moving index should be obtained for calculation of a seasonal index, but this demands long time series. The collection of the data is described in detail.
The PDF includes a summary in English.
-
Ervasti,
E-mail:
se@mm.unknown
This study concentrates on claims made against Finnish shippers or referred to arbitration by foreign buyers. The material is collected from two inquiries on claims and arbitrations, sent by the Finnish Sawmill Owners’ Association to Finnish sawmills engaged to exportation in 1954 and 1958.
On average the claims concerned about 5% of the sawn goods exported from Finland. They affected about 3% of the deliveries from the large sawmills, 10% of the deliveries of medium-sized sawmills and 15–20% of the small sawmills. In large consignments of raw material, variations in quality are not so marked as in smaller ones. Also, the grading of goods is stricter in the larger sawmills, and as they have well-established business relations, they have better opportunities to select goods with a view to demand of the buyer and the marketing areas.
The ratio of goods claimed was least in exports to remote countries, on the Western European markets in exports to Great Britain and the Netherlands. In Belgium, the ratio was high. In 1954 and 1958 approximately 12% of the claims were referred to arbitration. The bigger the sawmills, then on average the smaller the ratio of cases of arbitration in the number of claims. In Belgium, disputes have had to be settled by arbitration most frequently. Over 90% of the claims were made because of defects in quality or condition. About 5% were in respect of the specification of dimensions, and only 5% were related to other reasons than the good themselves. The sums paid for claims connected to the goods in 1958 represented only 54% of those demanded by the buyers. It would perhaps be advisable to consider the formulation of generally acceptable rules of the grading of export timber according to categories of shippers with definition of the minimum standard for each grade.
The PDF includes a summary in English.
-
Ervasti,
E-mail:
se@mm.unknown
The investigation examines export sales of Finnish sawn softwood sales in 1951-1958, concentrating on the volume of the sales. The material was collected from the archives of Finnish Sawmill Owner’s Association and the Finnish Sawmill Control Organization and the annual reports of the former. Correlation analysis was used in assessing the interdependence of the monthly sales volume and the price, and opening sales and the total sales volume of the year.
A slightly negative correlation was seen between the sale price and the monthly sales volume. Goods sold at under average prices are more abundant than goods sold at over average prices. Generally, with a rising price trend, the annual sales volume increased, but with falling prices the situation was reverse. The sales volume has been dependent on the business cycle development of prices. There was positive correlation between the opening sales and the total sales quantity for the year. The sales volume was at its maximum in the period between November and January, and at the minimum between March and September.
The time of the sales made to different countries differed little judged by quarterly statistics. It seems that the major shippers have generally concluded opening sales first. Northern Finnish shippers and the small shippers of Southern Finland have sold proportionately least during the last quarter. In general, the poorer the qualities in question the smaller on an average the proportion of opening sales but the greater the share of clearance sales.
The PDF includes a summary in English.
-
Ervasti,
E-mail:
se@mm.unknown
The aim of the investigation was to estimate the changes in the price ratios of different tree species of sawn timber, timber sizes and qualities, the ratios of the prices obtained by different shippers and from different countries, and their changes, especially the trends and business cycles. The data can be utilized in the organization of sawing and the drawing up of the price scales. The price ratios were calculated by taking 100 as the basic quantity and calculating the values for the other quantities accordingly, the values are called price indices. The data is collected from the sales reports in the archives of the Finnish Sawmill Owners’ Association.
Comparing the ratios of the basic prices, the prices of unsorted pine goods by shipper B (the leading marks of Northern Finland), were considerably higher than the others. The North Finnish pine goods are of the best quality in Finland. The price differences between the other shippers were small. The prices of unsorted spruce goods differed very little with different shippers. In some years the basic prices obtained for pine from different countries showed considerable differences although, in the overall view, the differences were small.
In the leading marks of Northern Finland, the differences between pine and spruce prices was greater than the other price differences. The quality of pine logs in Northern Finland is extremely high. During the periods of prosperity, the price difference between pine and spruce was relatively smaller than during depression. With spruce goods, the relative price difference for the qualities is smaller than with pine goods. For the both species the relative price differences diminished with the increase in the basic price. In the broadest sizes of unsorted pine goods, the price difference of the inch class is much bigger than in the small sizes. This is true especially for boards. The relative price difference between boards and battens increased distinctly with the advance in the basic price. A similar, though not as clear change took place in the price ratio of board and 7” sizes. The price differences between battens and boards are much smaller for spruce than for pine. The trends of the price indices of the different sizes show from the middle of 1920s and as far as the 9” u/s pine sizes very gentle, and in regards of the corresponding spruce sizes, a fairly sharp rising tendency.
The PDF includes a summary in English.
-
Ervasti,
E-mail:
se@mm.unknown
The objective of the investigation was to study the trends and fluctuations in the composition of sawn goods, changes due to business cycles, and casual fluctuations. The subject is confined to sawn softwood export to Great Britain, the Netherlands, Belgium and France (The North Sea countries) in 1920-1952. The data was based mainly on statistics of the Board of Customs, Series of Foreign Trade, Finnish Sawmill Owner’s Association and the Finnish Official Statistics.
The North Sea countries took 75-85% of the sawn softwood exported from Finland before World War II, and 50-70% of the quantity exported since the war. Sawn softwood export from Finland is almost exclusively long and small-dimension timber. The composition of the export from Finland to the North Sea countries was defined already during the 1900th century, and no big chances were observed even during the period of 1920-1952. The only definite trend was decrease in the proportion of u/s grade.
The PDF includes a summary in English.
-
Ervasti,
E-mail:
se@mm.unknown
The purpose of the investigation was to examine the seasonal pattern in Finnish export shipments and export sales of sawn softwood in 1927-1953. Statistics concerning shipments have been obtained from the Board of Customs, and material relating to sales has been provided by the Finnish Sawmill Owner’s Association (now Finnish Sawmills Association). On the basis of original monthly statistics, 13-month moving averages were computed. Finally, a seasonal index was calculated.
According to the results, the export shipments have a fairly apparent seasonal pattern with very low figures from January to April, a peak from June to August, and thereafter a gradual decline up to the end of the year. There are also considerable variations from year to year but in general the exports follow this rhythm. In contrast to export shipments the seasonal pattern of export sales is characterised by significant irregularity. Market developments and speculation play a far greater role than the seasonal factors. Indeed, a seasonal character in export sales can scarcely be discerned.
The Acta Forestalia Fennica issue 61 was published in honour of professor Eino Saari’s 60th birthday.
The PDF includes a summary in English.
-
Holopainen,
E-mail:
vh@mm.unknown
The investigation studies the development of a logger’s daily earnings, a sawmill worker’s hourly earnings, saw timber stumpage prices and saw timber export prices, expressed in marks in Finland in 1913-1953, concentrating upon the trends of real value.
Although worker’s earnings in forestry and sawmilling have developed differently especially in the 1920s, the late 1930s and the early 1940s, their general long-time development has been very similar. On the other hand, the stumpage prices increased in real value much sharply than wages before the World War II. The real value of stumpage prices dropped because of economic regulation measures in the 1940s until regulation was abolished and the Korean War boom raised them in 1951, to fall after that. The development depends partly of the development of export prices for sawn timber.
Without changing the distribution of income from exports the real value of labour earnings, measured by export prices, may rise at most at a pace corresponding to the productivity of work. In logging there has been no actual increase in the productivity in the 20th century. As the increase in the productivity in timber transportation has probably been absorbed in increased wages and capital costs in the branch, a rise in forest labour’s real earnings and stumpage is possible only by means of a rise in the productivity of sawmilling or a change in the distribution of export income. It seems that from the end of World War I up to the middle of 1920s this increase of productivity and in export prices of sawn timber was shared only by capital and possibly mill labour. After that up to World War II stumpage prices rose so steeply that they swallowed the entire increase in productivity and reduced capital’s share of the export price. In the 40s the level of earnings followed the trend of productivity in industry, made possible by a sharp reduction in stumpage.
The Acta Forestalia Fennica issue 61 was published in honour of professor Eino Saari’s 60th birthday.
The PDF includes a summary in English.
-
Heikinheimo,
E-mail:
lh@mm.unknown
The article summarizes import and export of timber and manufactured wood products in Europe before the Second World War, and outlines which are the opportunities of import and export after the war. The evaluation is based on statistics of 1936 and 1937. The export balance of Europe was positive; when all the timber assortments were included, Europe exported almost 10 million m3 more timber than it imported. Export and import of round timber were almost in balance, whereas export of paper products was about 12 million m3 larger than import. Consequently, European forest industry reached its magnitude before the war through export overseas. Foreign markets have been important especially for countries like Finland and other Nordic countries.
The war has disturbed the markets. In a scenario where Europe remains a closed sub-area in the global market, there is 10 million m3 excess of timber and wood products. Within Europe, United Kingdom is the greatest importer of timber and manufactured wood products. If UK was excluded from the European market, it would mean a big change in the export and import balance within the area. In 1936 and 1937 the import would have been only 45% and 55%, respectively, of the export if UK is not included in European numbers. If also Russia is excluded from the European sub-area, it would affect especially the export of round wood, sawn timber and plywood. Nordic countries have accounted for about 80% of European paper products export before the war. According to the article, Finnish wood resources do not allow big increase in sawn industry. However, there is potential in increasing demand of pulp in continental Europe in future. In general, Finnish forest industry would have to decrease the production, if the markets would be limited to the European sub-area.
The PDF includes a summary in German.
-
Pöntynen,
E-mail:
vp@mm.unknown
The consumption of wood and the value of the wood in the forest manufacturing industry in 1925‒1935 was studied using the official industrial statistics as the main source of data. The annual wood consumption of sawmills, plywood industry, match production, wood-wool industry, spool production, mechanical pulp mills, sulfite pulp mills and sulfate pulp mills was in average 15.6 million cubic meters, of which 4.0 million m3 was pulpwood, 11 million m3 saw logs and 0.44 million m3 veneer timber. The spool production used 163,200 m3, match production 39,900 m3 and wood-wool production 7,900 m3 of wood. When the wood consumption is at its maximum levels, the fellings cannot be increased sustainably. Thus, the sawing cannot be increased from the present level. The growth of pulp industry has created demand for small timber, and in that industry there is room for expansion.
The PDF includes a summary in German.
-
Pöntynen,
E-mail:
vp@mm.unknown
A survey was conducted to investigate the domestic trade of saw timber in Finland in 1932. The inquiry complemented the investigation of consumption of wood made at the same time. In 1932 there were 383 sawmills in Finland, the total production of which was 814,630 std (1 std = 4.672 m3). Only 12.9% of the production was sold in the home market. Of the domestic sales, the share of costal sawmills was 25.7% and the inland sawmills 74.3%. The domestic sales were proportionally largest (55.5%) in the smallest sawmills, and they decreased gradually as the production of the sawmill increased. Comparatively more of the sawn timber of birch is sold in the domestic market than of pine or spruce. The depression of the building trade that begun in 1930 affected the trade still in 1932.
The PDF includes a summary in English.
-
Hartikainen,
E-mail:
eh@mm.unknown
The article is a review on the forest resources, forestry and forest policy in the United States based on the publication A National Plan for American Forestry, published in 1933. The earlier estimates of forest resources of America have been proved to be exaggerated. The annual drain had been estimated to be twice the annual growth of the forests. The author disagrees with the estimates, and argues that the growth, if calculated with the American method, do not give right figures of the sustainable fellings.
The situation is better than estimated. The national plan of forestry suggests that the public ownership of the forests should be increased to 60% from the present 20%. In addition, there are plans to introduce public control of private forests in the American forestry so that fellings do not risk the sustained yield of the forests. Rapid depletion of the saw timber resources in the North-Eastern and Lake States, and the high lumber prices lead to the assumption that the timber resources of the United States are in decline. The following decrease in lumber consumption lead to surplus of sawmill capacity, and to increasing competition in the sector.
The PDF includes a summary in English.
-
Saari,
E-mail:
es@mm.unknown
The article is a review on the costs of raw materials in the Finnish sawmill industry in 1920s based on statistics collected from the members of the Central Association of the Finnish Woodworking Industries (now Finnish Forest Industries). The article includes statistics about the average size of if the saw timber bought in standing sales from private forests and harvested from the industry’s own forests, stumpage price of the timber, and labour costs of the harvesting of the wood. The average size of the logs was greater in the northern part of Finland, where the sawmills could limit the purchases of smaller timber. In the southern part of the country, the size of the timber decreased in 1922‒1926 due to growing demand of the timber. The long transport distances in the north influenced the costs. The number of logs per tree increased during the period. The level of stumpage price varied considerably in different parts of the country, falling from the south-west to the east and north. Competition of raw material increased the stumpage prices in 1922a and 1926‒27. The international economic downturn influenced the industry in 1929‒1931.
The PDF includes a summary in German.
-
Saari,
E-mail:
es@mm.unknown
The export of roundwood from Finland was studied based on the official statistics of foreign trade. The volumes were converted to solid volumes under bark. Roundwood (logs and masts) or raw timber trade consisted mainly of saw logs. The main tree species was Scots pine (Pinus sylvestrs L.) and Norway spruce (Picea abies (L.) H. Karst.). The annual volumes varied from 29,200 m3 in the war year 1918 to 657,200 m3 in 1924. Before the World War I the roundwood was exported mainly to Sweden and Russia, after the war the trade to Russia ceased. Also split spillet was a significant export item before the war. The export peaked in 1916 to 3 million m3, but decreased after the war to 30,000‒40,000 m3. The most important export item in the group of hewn timber has been Egyptian rafters, with annual export of 15,000‒284,600 m3 with the exception of the time of war. The export of spars exported to other countries than Egypt was highest before the war with 125,000 m3. The export of sleepers varied strongly, peaking in 1922. The total export of roundwood varied from 131,000 m3 in 1918 to 4.3 million m3 in 1927. Roundwood has mainly been exported to the European countries. Before the war, the main trading partners were United Kingdom and Russia. After the war the share of United Kingdom was nearly half of the volume, and Russia was replaced with Sweden.
The PDF includes a summary in German.
-
Pöntynen,
E-mail:
vp@mm.unknown
The main source of data was the official industrial statistics in 1911‒1929. The data was complemented with information from other sources, and the figures converted to solid volumes under bark. The wood consumption of wood manufacturing industry in the period varied strongly, being lowest in 1918 (2.2 million m3) and highest in 1927 (18.1 million m3). The wood consumption dropped during the World War I.
The wood manufacturing industry in Finland concentrated on sawmilling industry which has used annually 70‒80% of the wood consumed in the whole wood manufacturing industry. Other sectors of industry using wood were plywood industry, wood-wool industry, spool factories, match industry, mechanical pulpwood industry and pulp industry.
The PDF includes a summary in German.
-
Pöntynen,
E-mail:
vp@mm.unknown
The survey focuses on the stumpage prices of standing sales, where the buyer of the wood takes care of felling and transport of the timber. The study concentrates further on conifer sawn timber. The prices of the sawn timber rose continuously from 1891 to 1910. After 1913 the stumpage price fluctuations reflected the changes in the market. The article includes a detailed description on the changes of the saw timber in 1913-1922 and the factors affecting the prices. The prices are shown for different parts of the Finland. The first world war affects the prices and demand on saw timber in 1917-1918. In Northern Finland the prices of sawn timber increased slower than in Southern Finland. In general, the unfavorable factors have had stronger impact on the stumpage prices than the favorable.
The PDF includes a summary in German.
-
Saari,
E-mail:
es@mm.unknown
The influence of log properties (diameter, length, taper, volume, density and quality), sawing pattern, yield, sawing efficacy, stoppages, consumption of electric power and thereby on the financial result of sawing was examined. In addition, the significance of various revenues and costs were studied from the point of view of the financial result of sawing. The revenues from sawing are composed of revenues obtained from sawn goods, chips, sawdust and bark. The costs in sawing are made of raw material, capital, labour, energy and other costs. The results were calculated per diameter class and applying the basic principle of targeting all returns and costs on the different diameter classes.
The results are based on test sawings of a total of 1,606 Scots pine logs representing eight diameter classes, using conventional frame saw sawing patterns. In addition, a sawing simulator was used. Log top diameter had a significant influence on the financial result obtained when calculations were made per log volume. The financial result obtained for the biggest diameter class exceeded that of the smallest diameter class by FIM 99.1/m3. Sawing revenues accounted for FIM 66.0/m3 and sawing costs for FIM 33.1/m3 of this difference. In addition to being influenced by the top diameter, the yield and sawing efficacy were observed to have a clear influence on the financial result. The influence of stoppages was smaller.
The only means of gaining significant improvement in the annual result obtained from sawing were improvements in the revenues from sawn goods or reductions in the cost of raw material. Increase of the minimum diameter led to a significant improvement in the annual result obtainable from sawing only if the production time remained unchanged; i.e., when correspondingly more logs from the other diameter classes were sawn. If the production time was reduced by an amount corresponding to the increase in minimum diameter, then the annual result fell dramatically except in the case of minimum diameter.
The PDF includes a summary in English.
-
Hakala,
E-mail:
hh@mm.unknown
Residue of the wood is good raw material for pulp and board industries, but the question of the use of barking waste still remains to a great extent unsolved. This research deals with the possibilities to utilize the barking waste of sawmill industry in general and, in particular, its use as a soil improver and substrate for plants. It also explains the industrial manufacturing method of composted bark, bark humus, developed by the author as well as the properties of bark humus and the economy of bark humus and the economy of manufacturing.
The PDF includes a summary in Finnish.
-
Isomäki,
E-mail:
oi@mm.unknown
The purpose of the present investigation was to study the extent of human interference with the forests of different epochs in the district of north Ostrobothnia in Northern Finland, and its effect on the condition of the forests.
The study revealed that the quantities of wood removed were not most detrimental to the condition of the forest; the regionally irregular loggings and the logging methods employed were the most harmful. The old forms of wood utilization, tar industry, shipbuilding, sawmill industry and timber exports, were characterized by timber selection. Public opinion considered it the only recognized cutting method long after the conditions had changed and silvicultural methods should have been used.
The spread and abandonment of selection cuttings are illustrated in the results of first National Forest Surveys in Finland. According to the first survey (1921–1924), nearly half of the loggings in the province of Oulu were based on selection, which spoiled and devastated 41% of the forests. In the 1930s one-fifth of the North Ostrobothnian forests were weakened by selection cuttings, in 1960s the figure was 6%. The article also summarises the extent of tar and pitch production, sawmill industry, shipbuilding and household wood consumption of wood in the area.
The PDF includes a summary in English
-
Alho,
E-mail:
pa@mm.unknown
