Articles containing the keyword 'USA'

The existence and direction of causal relationships between the time series for the Finnish roundwood market for the period 1960–1994 is tested. Using simple bivariate analysis, we found evidence that for both logs and pulpwood, the lagged prices are helpful in forecasting quantity for the next year, but not vice versa. Saw log stumpage prices have significantly Granger-caused pulpwood prices over the business cycles, but the effect has diminished towards the present time. For quantities traded, the direction of causality was rather from pulpwood to saw logs. The consistency of bivariate test results was checked by the Granger-causality tests within trivariate VAR-models for both markets, and the results were found to be fairly similar to bivariate tests. The price fluctuations in the international markets for forest products have been found to be carried to domestic wood markets dominantly via the pulpwood part of the market.

• Toppinen, E-mail: at@mm.unknown

The winter 1986–87 was unusually cold; the snow cover remained thin and consequently the soil froze to a considerable depth. In spite of the severe frost, the lowest temperatures measured at the ground surface was -10.3°C and in the soil at the depth of 10 cm -5.8°C. The temperature sum of the following summer was unusually small and the soil frost melted more slowly than usual. The winter frosts did not have a decisive influence on the survival of planted seedlings.

The PDF includes an abstract in English.

• Kubin, E-mail: ek@mm.unknown

The purpose of the study was to determine the effects of the origin of seeds and the location of cultivation of Scots pine (Pinus sylvestris L.) on certain properties particularly important to the pulp industry. The research material consisted of six parallel trials of the same 12 provenances. Increment cores were taken of a total of 1,267 sample trees, 19 years old. The location of the trial site generally affected the properties to a larger extent than the origin of the seed. The effect of the variation of wood density and fibre yield on the cultivation values of the provenances was only a few percentages on average, however, at most the effect was nearly 10%. Eastern Finnish provenances adapted well to western Finnish conditions.

The PDF includes an abstract in Finnish and French.

• Velling, E-mail: pv@mm.unknown
• Nepveu, E-mail: gn@mm.unknown

The susceptibility of Betula pendula Roth and B. pubescens Ehrh. Saplings to stem spot disease caused by Godronia multispora J.W. Groves and Fusarium avenaceum (Fr.) Sacc. was studeied. B. pendula proved to be more susceptible than B. pubescens on all studied soils, especially on peat. G. multispora was more pathogenic than F. avenaceum. Inoculations with G. multispora in the spring and summer induced smaller cancers than in the autumn.

The PDF includes an abstract in Finnish.

• Romakkaniemi, E-mail: pr@mm.unknown

The Lauhavuori area is barren, consisting of sandstone and granite bedrock covered by coarse moraine and sand. The woodlands are dominated by Scots pine (Pinus sylvestris L.) and Calluna. The top of the hill, rising 230 metres above the sea level, is more fertile, as it was never covered by the ancient Baltic Sea. Numerous springs and spring brooks are bordered by herb-rich Norway spruce (Picea abies (L.) H. Karst.) woodlands and swamps. Although most of the peatlands are oligotrophic, several mesotrophic peatland plants occur, some southern, giving the peatlands a rather northerly character.

The study area is 8 by 12 km. According to the vegetation analysis, 310 species were identified, 208 of which were native to the area and 102 immigrants. The native species can be separated from the immigrants because the area is largely undisturbed.

The PDF includes a summary in English.

• Suominen, E-mail: js@mm.unknown
• Varkki, E-mail: av@mm.unknown

The aim of the paper was to describe the development of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) seedling stands on drained peatlands and to find out the principal factors influencing their growth. The material under survey consists of 180 sample plots distributed from southern coast of Finland to the Polar Circle.

The most important growth factors have been the accumulated temperature sum, site quality, drainage intensity and silvicultural condition, such as the density of the stand, the proportion of birch in the stand, and the amount of possible shelterwoods. The influence of these factors, and to some extent the influence of fertilizing, and the disturbing effects of some forest damages, such as frost, growth disturbances and elk damages were investigated. Comparisons of the development in the seedling stands on drained peatlands with the known development of seedling stands in mineral soils were made.

The PDF includes a summary in English.

• Heikurainen, E-mail: lh@mm.unknown

The need for the planning and analysing of public policy has increased in economic and social policy, along with the expansion of the public sector, i.e. as the number of aims of the policy has increased and the objects of it have become more versatile, the objects of allocation have likewise been multiplied. In addition, the significance of planning a public forest policy has been emphasized by many economic and social changes in forestry and the timber economy.

The purpose of the present paper is to outline a general frame of reference for empirical policy analysis, upon which the effectiveness analysis of forest policy is also based. The approach serves as a methodological frame for the empirical analysis, presented in the following paper of this issue of Silva Fennica, in which econometric methods are applied to the examination of the effect of public forest policy.

• Tikkanen, E-mail: it@mm.unknown

The paper deals with the establishment and present situation of the national parks in USA. The aim of the establishment of national parks was, on the one hand, to preserve part of the natural environment, and on the other hand, to reserve areas suitable for recreation. In addition to the national parks, or rather within them, so-called wilderness areas have been established since 1964. In these areas even such measures as fire and insect control are avoided to the greatest extent possible. The use of the wilderness areas for recreation is restricted to foot and horse trails as well as watercourses, all motorized transportation being prohibited. Campgrounds are provided with only the most primitive comforts. So far only a few wilderness areas have been established in the national parks, but there are tens of suitable areas that have been reserved for this purpose.

The PDF includes a summary in English.

• Salo, E-mail: ls@mm.unknown

Since the end of 1960s some 350 voluntary forestry cooperation areas covering about 10% of Finland’s total private forest area have been established in the country in order to avoid drawbacks of small individual units. The aim of the study was to find out why most of these cooperative areas have been established in the area of northern Karelia forestry board district in Eastern Finland, whereas elsewhere establishing has advanced very slowly. »Soft» research techniques based on free interviews was used to gather the data. Attitudes of the interest organizations of forest owners and forest industry companies, question of organizer of cooperation, and resources for regional forestry planning were found as most important factors to explain the differences in development of cooperation in different areas.

The PDF includes a summary in English.

• Hurskainen, E-mail: jh@mm.unknown
• Reunala, E-mail: ar@mm.unknown

The time interval between final felling and plantation means a waste of time and thus a production loss, and may lead to lush growth of ground cover and hardwood sprouts, which increases expenses in forest management. The objective of this study was to determine the length of time between final felling and artificial regeneration in private forests in the forest districts of Uusimaa-Häme in Southern Finland and Pohjois-Häme in Central Finland. The material consists of a sample of 150 plans of the 952 cutting and regeneration plans in the district of Uusimaa-Häme and a sample of 140 plans of the 1,102 plans in Pohjois-Häme.

The time lag between final cutting and seeding or planting was on average 1.4 years in Pohjois-Häme district and 0.7 years in Uusimaa-Häme. In the latter district, 56% of the logged area was regenerated in the spring immediately following the cutting, and 84% not later than in the second spring. In Pohjois-Häme, 29% of the harvested area was regenerated immediately in the first spring following cutting, and 79% not later than in the third spring following cutting.

In Pohjois-Häme, the interval was shortest in the smallest forest holdings, and longest in the largest holdings with the largest regeneration areas. The length seems to depend mainly on the size of the regeneration area. In Uusimaa-Häme district, the interval was shortest in the smallest holdings, rather short in the largest, and longest in the intermediate-size forest properties. Seeding with Scots pine (Pinus sylvestris L.) was used in almost all regeneration areas.

The forest owners had mainly carried out the regeneration work themselves. In the Pohjois-Häme area, the interval was shorter when the district forestry board regenerated the area. 35% of the regenerated areas had required supplementary planting in Pohjois-Häme, and 47% in the Uusimaa-Häme area. Supplementary planting was more common in areas regenerated later after the cutting. In Pohjois-Häme, according to the reports of the forest owners, 75% of the regenerated areas required tending during the first three years, in Uusimaa-Häme, 80%.

The PDF includes a summary in English.

• Yli-Vakkuri, E-mail: py@mm.unknown
• Autio, E-mail: aa@mm.unknown
• Vehkaoja, E-mail: jv@mm.unknown

Due to mechanization of draining of peatlands, also open peatlands have been included in the draining projects due to technical reasons. Some research has been published on afforestation of open drained peatlands, but there is yet no experiments that reaches the entire development of the stands. The purpose of this paper is to discuss the possibility of extending the planting season of Scots pine (Pinus sylvestris L.) over the entire growing season in drained peatlands, where the water condition of the site is probably not the factor limiting forest development. An open low-sedge swamps in Southern Finland were planted in early summer and two weeks in midsummer in 1967.

In the light of the results, planting Scots pine would seem possible in drained peatlands throughout the growing season. However, plants may suffer considerably from lifting for the plantation in August. The success of planting at the turn of September and October is also uncertain. The nursery must be situated close to the areas to be planted, since the transportation and handling of plants during the growing season must be carried out with extreme care. The seasonality of planting work could be decreased by extending the planting season. In the future, several transplant storing methods should be tried out in connection with similar planting-time experiments.

The PDF includes a summary in English.

• Päivänen, E-mail: jp@mm.unknown

Silva Fennica issue 52 includes presentations held in professional development courses, arranged for foresters working in public administration in 1938. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes a study of forest management practices suitable for in Hylocomnium-Myrtillus site type forests, typical for Northern Finland. A special problem for the forest site type is poor regeneration due weak seed production of Norway spruce (Picea abies L. Karst.) and thick moss layer.

• Heikinheimo, E-mail: oh@mm.unknown

Silva Fennica issue 46 includes presentations held in professional development courses, arranged for foresters working in public administration in 1937. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service. 

This presentation describes inspection of forest regeneration of mineral soil forest types and drained peatlands, and inspection of ditches. 

• Ahola, E-mail: va@mm.unknown

Silva Fennica issue 46 includes presentations held in professional development courses, arranged for foresters working in public administration in 1937. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service. 

This presentation describes calculation of the annual financial performance of a forest district and a county. 

• Saari, E-mail: es@mm.unknown

Silva Fennica Issue 39 includes presentations held in professional development courses in 1935 that were arranged for foresters working in public administration. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the peparation of national budget in forestry administration.

• Pekkala, E-mail: mp@mm.unknown

The objectives of the paper were to find out structure of the sawing time when using field circular saws, influence of the different factors on the sawing time and its structure, average sawing time per unit of raw material and sawn goods, and the fundamentals for the creation of an equitable system for the determination of the basis of payment in sawing work. The observations of the time study were made on both a single log and a work period basis. The material was collected using four saws of different brands.

The results showed that the season when the work was done, and top diameter of the logs to be sawn affected the constant times included in the total sawing time and the time used for sawing of center pieces. While the tree species did not affect the constant times, the grade of the logs of different tree species did have effect, especially in winter sawing. The factors affecting the different phases of the work are described in detail. The length of sawing time was longer in the winter than in the summer. The preparatory jobs in sawing required in average 82 cmin per log, and the time increased with increasing top diameter. The actual sawing is the most time-consuming part of the work, it took in average 132 cmin. 

The PDF includes a summary in English.

• Granvik, E-mail: bg@mm.unknown

Since Finnish professor A.K. Cajander published his theory on forest types, there have been discussion and contradictory studies on certain forest types. This paper is a litterature review on the thick-moss type in Northern Finland and its parallel types in Kainuu and Southern Finland. First, the principles of Cajander’s theory on forest types is described and discussed. It is concluded that Cajander has described forest site types as their common, genuine variants. Borderline variants have been excluded from the description. 

Second, the North Finnish thick-moss type (Hylocomnium-Myrtillus type, HMT) and its position in Cajander’s system is discussed. Concepts of this forest type have varied considerably, and it has been argued that the type does not fit Cajander’s system very well, as it arises as a result of the invasion of other forest types by Norway spruce (Picea abies (L.) Karst.) with consequent degeneration of the site.  

The writer concludes findings of the results of the previous studies about MHT and its relations to the Myrtillus type. Cajander in his system included the thick-moss type in the moist upland forests as a type whose vegetation is less exacting than that of the Myrtillus type. This position seems to be the right one. Some factors point out the moist nature of HMT: the ability of Norway spruce to compete, a relatively high persipitation, the humidity of the climate in general and the rather poor water percolation capacity of the moraine soil. The HMT sites are relatively poor. It is stated that the opinion that the thick-moss type is secondary state of development of the Myrtillus type has no plant sociological, ecological, mensurational or silvicultural foundation. The type is probably Finland's most dynamic forest type, but in the natural forest its dynamics are confined to such changes as are permitted within the same forest type. HMT must be described as three series of plant association types, which differ from another to some extent. 

The PDF includes a summary in English. 

• Keltikangas, E-mail: vk@mm.unknown

The investigation examines export sales of Finnish sawn softwood sales in 1951-1958, concentrating on the volume of the sales. The material was collected from the archives of Finnish Sawmill Owner’s Association and the Finnish Sawmill Control Organization and the annual reports of the former. Correlation analysis was used in assessing the interdependence of the monthly sales volume and the price, and opening sales and the total sales volume of the year.

A slightly negative correlation was seen between the sale price and the monthly sales volume. Goods sold at under average prices are more abundant than goods sold at over average prices. Generally, with a rising price trend, the annual sales volume increased, but with falling prices the situation was reverse. The sales volume has been dependent on the business cycle development of prices. There was positive correlation between the opening sales and the total sales quantity for the year. The sales volume was at its maximum in the period between November and January, and at the minimum between March and September.

The time of the sales made to different countries differed little judged by quarterly statistics. It seems that the major shippers have generally concluded opening sales first. Northern Finnish shippers and the small shippers of Southern Finland have sold proportionately least during the last quarter. In general, the poorer the qualities in question the smaller on an average the proportion of opening sales but the greater the share of clearance sales.

The PDF includes a summary in English.

• Ervasti, E-mail: se@mm.unknown

The aim of the investigation was to estimate the changes in the price ratios of different tree species of sawn timber, timber sizes and qualities, the ratios of the prices obtained by different shippers and from different countries, and their changes, especially the trends and business cycles. The data can be utilized in the organization of sawing and the drawing up of the price scales. The price ratios were calculated by taking 100 as the basic quantity and calculating the values for the other quantities accordingly, the values are called price indices. The data is collected from the sales reports in the archives of the Finnish Sawmill Owners’ Association.

Comparing the ratios of the basic prices, the prices of unsorted pine goods by shipper B (the leading marks of Northern Finland), were considerably higher than the others. The North Finnish pine goods are of the best quality in Finland. The price differences between the other shippers were small. The prices of unsorted spruce goods differed very little with different shippers. In some years the basic prices obtained for pine from different countries showed considerable differences although, in the overall view, the differences were small.

In the leading marks of Northern Finland, the differences between pine and spruce prices was greater than the other price differences. The quality of pine logs in Northern Finland is extremely high. During the periods of prosperity, the price difference between pine and spruce was relatively smaller than during depression. With spruce goods, the relative price difference for the qualities is smaller than with pine goods. For the both species the relative price differences diminished with the increase in the basic price. In the broadest sizes of unsorted pine goods, the price difference of the inch class is much bigger than in the small sizes. This is true especially for boards. The relative price difference between boards and battens increased distinctly with the advance in the basic price. A similar, though not as clear change took place in the price ratio of board and 7” sizes. The price differences between battens and boards are much smaller for spruce than for pine. The trends of the price indices of the different sizes show from the middle of 1920s and as far as the 9” u/s pine sizes very gentle, and in regards of the corresponding spruce sizes, a fairly sharp rising tendency.

The PDF includes a summary in English.

• Ervasti, E-mail: se@mm.unknown

The analysis of costs is the foundation for the efficient management of logging activities. However, there is little research on cost accounting of logging. This article is an overview on harvesting of timber and its cost accounting, concentrating on joint costs. Costs have to be divided on their structural elements and then regrouped according to different accounting needs to be investigated. This investigation bases the structural cost analysis on running booking of costs. Due to the variability of logging, the costs are divided in detail into categories. The costs of logging are classified by their origin into personnel cost, material costs, costs of services, compensation for use, unrequited costs, risks, depreciation and interest. Further, the costs are classified according to the subject and quality of performance, and by location.

The PDF includes a summary in English.

• Einola, E-mail: je@mm.unknown

The objective of the investigation was to study the trends and fluctuations in the composition of sawn goods, changes due to business cycles, and casual fluctuations. The subject is confined to sawn softwood export to Great Britain, the Netherlands, Belgium and France (The North Sea countries) in 1920-1952. The data was based mainly on statistics of the Board of Customs, Series of Foreign Trade, Finnish Sawmill Owner’s Association and the Finnish Official Statistics.

The North Sea countries took 75-85% of the sawn softwood exported from Finland before World War II, and 50-70% of the quantity exported since the war. Sawn softwood export from Finland is almost exclusively long and small-dimension timber. The composition of the export from Finland to the North Sea countries was defined already during the 1900^th century, and no big chances were observed even during the period of 1920-1952. The only definite trend was decrease in the proportion of u/s grade.

The PDF includes a summary in English.

• Ervasti, E-mail: se@mm.unknown

The purpose of the investigation was to examine the seasonal pattern in Finnish export shipments and export sales of sawn softwood in 1927-1953. Statistics concerning shipments have been obtained from the Board of Customs, and material relating to sales has been provided by the Finnish Sawmill Owner’s Association (now Finnish Sawmills Association). On the basis of original monthly statistics, 13-month moving averages were computed. Finally, a seasonal index was calculated.

According to the results, the export shipments have a fairly apparent seasonal pattern with very low figures from January to April, a peak from June to August, and thereafter a gradual decline up to the end of the year. There are also considerable variations from year to year but in general the exports follow this rhythm. In contrast to export shipments the seasonal pattern of export sales is characterised by significant irregularity. Market developments and speculation play a far greater role than the seasonal factors. Indeed, a seasonal character in export sales can scarcely be discerned.

The Acta Forestalia Fennica issue 61 was published in honour of professor Eino Saari’s 60th birthday.

The PDF includes a summary in English.

• Holopainen, E-mail: vh@mm.unknown

Planning of large central tree nurseries, which has become topical in Finland, means that the seedlings will be used in a wide geographical area. The nursery must decide which proveniences of seeds of the different tree species it will use. This concerns also the customer that buys the seedlings. The planting and lifting of the seedlings in the nursery have to be timed so that the seedlings are in a right state of growth at the time of planting.

The growth of the seedlings can, under certain conditions, be promoted by using a slightly southerly seed provenience, and large-sized seeds. There are, however, limitations to how much the seeds can be transferred northwards. If the nursery lies much south of the planting site, the seedlings have started height growth at the time of planting. This applies especially larch (Larix sp.), Scots pine (Pinus sylvestris L.) and birch (Betula sp.), but affects less Norway spruce (Picea abies (L.) Karst.). The problem can be handled by using a cool storage space for the seedlings waiting for a delivery in the nursery.

According to an international study, seedlings grown from seeds collected in countries south from Finland usually die already during the first two years in the nursery. Within Finland the seeds can be transferred at least by two latitudes. Spruce seems to tolerate longer transfer. Seed orchards should be planted south of the seed’s origin to ensure better yield and better quality seeds.

The Silva Fennica issue 61 was published in honour of professor Eino Saari‘s 60th birthday.
The PDF includes a summary in German.

• Heikinheimo, E-mail: oh@mm.unknown

The purpose of the analysis presented in the article was to form an estimate as to future Finnish-American trade in forest products. The Finnish-American trade, that had its beginning in 1919, has been steadily growing and at the outbreak of the Second World War occupied third place in Finland’s total foreign trade. Over 90% of the Finnish exports consisted of forest industry products, pulp and newsprint being the most important items. The sales associations of the pulp and paper industries made it possible for the industries to gain a footing in the American market.

The production of pulp and most kinds of paper has increased in the USA up to 1942, but production of newsprint has tended to decrease. The timber resources of the country are large, but there is a considerable timber deficit in the northeastern states, therefore, these regions must be the principal aim for a campaign to build up the future market. According to the survey of future need of imports to the USA, more than two million tons of pulp and 2-3 million tons of paper products are needed in the immediate post-war period. The Canadian and Swedish competition will remain at about the same level, but one Finnish advantage, the quality, has disappeared on account of the progress made by research in the USA during the war.

The PDF includes a summary in Finnish.

• Runeberg, E-mail: lr@mm.unknown

The article describes the distribution of the European white elm; its sites and vegetation communes; phenotype (size and form); variations in the leaves; inflorescence and fruiting; germinative capacity of the seeds; regeneration, both vegetative propagation and from seeds; commercial use of the timber; and the history of European white elm.

The PDF contains a summary in Finnish.  

• Linkola, E-mail: kl@mm.unknown

The first proper growth and yield tables were prepared in Finland already in 1872, but they have been used little as the needs of forestry and forest sciences increased. One of the problems of the old yield tables was how the site quality classes are determined. The new growth and yield tables use the forest site type classification, which enables the use of same site types for all tree species. This makes it possible to compare the growth of different tree species in same kind of sites. The tables also use stem frequency distribution series. In the first stage, the tables were prepared for Southern and Central Finland.

The PDF includes a summary in German.

• Ilvessalo, E-mail: yi@mm.unknown

The forest site classification system used in Finland is based on ground vegetation rather than the wood production capacity. A. K. Cajander has presented a detailed classification of different forest site classes in different parts of the country. This study focuses on the forest site types of Northern Finland, which are less well defined. The article presents detailed vegetation analysis and lists of plant species in different forest site types in Northern Finland. In contrast to southern parts of Finland, both the natural Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst) stands are uneven-aged in the north. The forests are also relatively thin. There is a marked difference in height of trees between the richest and poorest sites, but the dominant trees of the same site type were of similar height both in the north and south part of the study area. The differences in the height of dominant trees seem to be smaller than in Southern Finland. Also, in windy areas prone to snow damage, climate conditions can affect tree growth more than the forest site type. In more sheltered areas forest site type determines forest growth.

The PDF includes a summary in German.

• Lakari, E-mail: ol@mm.unknown

Residue of the wood is good raw material for pulp and board industries, but the question of the use of barking waste still remains to a great extent unsolved. This research deals with the possibilities to utilize the barking waste of sawmill industry in general and, in particular, its use as a soil improver and substrate for plants. It also explains the industrial manufacturing method of composted bark, bark humus, developed by the author as well as the properties of bark humus and the economy of bark humus and the economy of manufacturing.

The PDF includes a summary in Finnish.

• Isomäki, E-mail: oi@mm.unknown

Fungal diaspores were caught in Southern Finland (Helsinki, Turku, Jyväskylä, Lappeenranta) and in Northern Finland (Oulu, Ivalo) in 1967—68 on exposed discs of Picea abies (L.) Karst. wood. In the laboratory, the diaspores on the discs developed mycelia which stained the wood. A month after exposure fungi and bacteria were isolated from stained areas.

The number of identified fungal species was relatively high and included fungi of different taxonomic groups. The most common fungi identified were Peniophora gigantea and Trichoderma viride. The most common Agaricaceae obtained were species of Hypholoma. Of the fungi imperfecti, relatively high numbers of not only Trichoderma viride but also of the Alternaria and Fusarium species were isolated. According to the investigation, species of several fungal groups seem to participate in the early stages of the decayed process of spruce.

The PDF includes a summary in Finnish.

• Kallio, E-mail: tk@mm.unknown

This methodical study aims at assessing discount value and its nature and function in setting a price for a forest holding. The aim is to study how the subject interested in buying or selling a woodlot could in the most meaningful way use discount value to prepare the sale and aid the decision making, taking account his personal interests. The paper includes a literature review on the determination of value.

It is concluded that woodlots have no «correct and real» values and, therefore, they cannot be calculated. Value is formed for the woodlots only in connection to the subject running the household, and his environment and actions. A discount value can be defined as a discount value of future net incomes. In the study different ways to calculate discount value are analysed.

The PDF includes a summary in German.

• Ahonen, E-mail: la@mm.unknown

The Asian chestnut gall wasp (ACGW), Dryocosmus kuriphilus Yasumatsu (Hymenoptera: Cynipidae) is one of the most important pests in Castanea species worldwide. In 2012, it was found for the first time in Catalonia (Spain) and a year later, in the north of Spain (Cantabria). Today, it is present in 14 Spanish provinces. In search of biological control against the ACGW, several authors have previously found the relationship between the presence of some Fusarium Link species in necrotic galls and wasp mortality due to the production of different types of wall-degrading enzymes and entomopathogenic mycotoxins. The objective of this study was to investigate the mycobiota associated with necrotic galls to find interesting perspectives for biological control of the ACGW. For this purpose, in 2014, 119 necrotic galls of Castanea sativa Miller were plated to isolate and identify the associated fungi. The fungal isolates were identified by the morphology of the fruiting bodies and DNA analyses. From necrotic galls, 7 species of fungi were identified. Of these, we highlight three species of Fusarium Link as well as the presence of Gnomoniopsis smithogilvyi Shuttlew, Liew & Guest due to its toxic capacity. Further studies are required to verify the effectiveness of these fungal species as biocontrol agents against the ACGW.

• Fernandez, Dpt. of Agroforestry Sciences, ETSIIAA, University of Valladolid, Av. Madrid 50, 34071 Palencia, Spain; Sustainable Forest Management Research Institute UVa-INIA, ETSIIAA, 34071 Palencia, Spain http://orcid.org/0000-0002-1646-5027 E-mail: mffernan@agro.uva.es
• Bezos, Sustainable Forest Management Research Institute UVa-INIA, ETSIIAA, 34071 Palencia, Spain E-mail: dianabezos@yahoo.es
• Diez, Sustainable Forest Management Research Institute UVa-INIA, ETSIIAA, 34071 Palencia, Spain; Dpt. of Plant Production and Forest Resources, University of Valladolid, Av. Madrid 50, 34071 Palencia, Spain E-mail: jdcasero@pvs.uva.es

Bamboo species have a very significant ecological and economic impact. Determining morphological and genetic differences among bamboo genera and species are crucial to explore desirable traits for breeding purposes. Several advances have been made in the taxonomy of bamboos by using molecular fingerprinting tools and next generation sequencing technologies. Nevertheless, classical molecular markers such as RAPD (Random Amplified Polymorphic DNA), AFLP (Amplified Fragment Length Polymorphism) and ISSR (Inter Simple Sequence Repeats) also provide an accurate discrimination among genera and species. Moreover, the RAPD-RFLP (Random Amplified Polymorphic DNA, Restriction Fragment Length Polymorphism) method, in which amplification products from RAPD are digested with restriction enzymes, is a reliable, fast and cost-effective method for fingerprinting. RAPD-RFLP has been scarcely used in the literature and no report regarding bamboo taxonomy is available with this method. Here we explored the molecular (RAPD, RAPD-RFLP) variation among genera (Bambusa, Dendrocalamus, Guadua and Phyllostachys) and species of bamboo cultivated in Brazil. Both molecular markers allowed clear distinction among the genera studied. Moreover, high cophenetic correlation values in UPGMA clusters indicated their potential for discriminating bamboo species. The digestion of RAPD products (RFLP) resulted in high number of polymorphic bands and produced very characteristic profiles for each genus with three enzyme combinations (HindIII/HaeIII, HinfI/RsaI, and single digestion with MspI). We recommend RAPD-RFLP as a reproducible and informative method for screening differences among genera, species and varieties of bamboos. Providing a cost-effective and accurate method for species identification and characterization is straightforward for bamboo conservation, management and breeding.

• Konzen, Cell and Molecular Biology Laboratory, Center for Nuclear Energy in Agriculture (CENA), University of Sao Paulo (USP), Centenário Av., 303, Piracicaba, SP, P.O. Box 96, Brazil; Forest Sciences, Federal University of Lavras (UFLA), Lavras, MG, P.O. Box 3037, Brazil E-mail: erkonzen@gmail.com
• Peron, Cell and Molecular Biology Laboratory, Center for Nuclear Energy in Agriculture (CENA), University of Sao Paulo (USP), Centenário Av., 303, Piracicaba, SP, P.O. Box 96, Brazil E-mail: rperon@purdue.edu
• Ito, Embrapa Western Agriculture, Brazilian Agricultural Research Corporation (EMBRAPA), BR 163 Rd., km 253, Dourados, MS, P.O. Box 449, Brazil E-mail: marcio.ito@embrapa.br
• Brondani, Forest Sciences, Federal University of Lavras (UFLA), Lavras, MG, P.O. Box 3037, Brazil E-mail: gebrondani@gmail.com
• Tsai, Cell and Molecular Biology Laboratory, Center for Nuclear Energy in Agriculture (CENA), University of Sao Paulo (USP), Centenário Av., 303, Piracicaba, SP, P.O. Box 96, Brazil E-mail: tsai@cena.usp.br

• Ferrarese, College of Forestry and Conservation, The University of Montana, Missoula, MT, USA; (present) Center for the Environmental Management of Military Lands, 1490 Campus Delivery, Colorado State University, Fort Collins, CO 80523, USA E-mail: jena.ferrarese@colostate.edu
• Affleck, College of Forestry and Conservation, University of Montana, Missoula, MT, USA E-mail: david.affleck@cfc.umt.edu
• Seielstad, College of Forestry and Conservation, University of Montana, Missoula, MT, USA E-mail: carl.seielstad@firecenter.umt.edu

• Henke, Department Ecoinformatics, Biometrics & Forest Growth, University of Göttingen, 37077 Göttingen, Germany E-mail: mhenke@uni-goettingen.de
• Huckemann, Institute of Mathematical Stochastics, University of Göttingen, 37077 Göttingen, Germany E-mail: huckeman@math.uni-goettingen.de
• Kurth, Department Ecoinformatics, Biometrics & Forest Growth, University of Göttingen, 37077 Göttingen, Germany E-mail: wk@informatik.uni-goettingen.de
• Sloboda, Department Ecoinformatics, Biometrics & Forest Growth, University of Göttingen, 37077 Göttingen, Germany E-mail: bslobod@web.de